Document
T320HVN02.0 SKD Product Specification Rev.01
Model Name: T320HVN02.0
Issue Date : 2012/02/10 ( )Preliminary Specifications (*)Final Specifications
© Copyright AUO Optronics Corp. 2011 All Rights Reserved.
Page 1 / 24
T320HVN02.0 SKD Product Specification Rev.01
Contents
No CONTENTS RECORD OF REVISIONS
1 GENERAL DESCRIPTION 2 ABSOLUTE MAXIMUM RATINGS 3 ELECTRICAL SPECIFICATION
3-1 ELECTRIACL CHARACTERISTICS 3-2 INTERFACE CONNECTIONS 3-3 SIGNAL TIMING SPECIFICATION 3-4 SIGNAL TIMING WAVEFORM 3-5 COLOR INPUT DATA REFERENCE 3-6 POWER SEQUENCE 4 OPTICAL SPECIFICATION 5 OPEN CELL DRAWING 6 RELIABILITY TEST ITEMS 7 PACKING 7-1 OPEN CELL SHIPPING LABEL 7-2 PACKING PROCESS 8 PRECAUTION 8-1 MOUNTING PRECAUTIONS 8-2 OPERATING PRECAUTIONS 8-3 ELECTROSTATIC DISCHARGE CONTROL 8-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE 8-5 STORAGE 8-6 HANDLING PRECAUTIONS FOR PROTECT FILM
© Copyright AUO Optronics Corp. 2011 All Rights Reserved.
Page 2 / 24
T320HVN02.0 SKD Product Specification Rev.01
Record of Revision
Version
Date
0.0 2011/11/09
0.0 2012/02/10
Page
Description
First release
15 Center Transmittance was revised.
21 Shipping label definition was revised.
© Copyright AUO Optronics Corp. 2011 All Rights Reserved.
Page 3 / 24
T320HVN02.0 SKD Product Specification Rev.01
1. General Description
This specification applies to the 31.5 inch Color TFT-LCD SKD model T320HVN02.0. This LCD open cell unit has a TFT active matrix type liquid crystal panel 1,920x1,080 pixels, and diagonal size of 31.5 inch. This open cell unit supports 1,920x1,080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 10-bit gray scale signal for each dot.
General Information
Items
Specification
Unit
Active Screen Size
31.5 inch
Display Area
698.4 (H) x 392.85 (V)
mm
Outline Dimension
717.585 (H) x 407.866 (V) x 1.519 (D) mm
Driver Element
a-Si TFT active matrix
Display Colors
10 bit
Colors
Number of Pixels
1,920x1,080
Pixel
Pixel Pitch
0.36375 (H) x 0.36375 (W)
mm
Pixel Arrangement
RGB vertical stripe
Display Operation Mode
Normally Black
Surface Treatment
Anti-Glare, 3H
Haze=2%
Rotate Function
Unachievable
Note 1
Display Orientation
Signal input with “A”
Note 2
Note 1: Rotate Function refers to LCD display could be able to rotate.
Note 2: LCD display as below illustrated when signal input with “A”.
Note
© Copyright AUO Optronics Corp. 2011 All Rights Reserved.
Page 4 / 24
T320HVN02.0 SKD Product Specification Rev.01
2. Absolute Maximum Ratings
The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit
Item Logic/LCD Drive Voltage Input Voltage of Signal Operating Temperature Operating Humidity Storage Temperature Storage Humidity Panel Surface Temperature
Symbol Vcc Vin TOP HOP TST HST PST
Min -0.3 -0.3
0 10 -20 10
Max 14 4
+50 90 +60 90 65
Unit [Volt] [Volt] [oC] [%RH] [oC] [%RH] [oC]
Conditions Note 1 Note 1 Note 2 Note 2 Note 2 Note 2 Note 3
Note 1: Duration:50 msec.
℃Note 2 : Maximum Wet-Bulb should be 39 and No condensation. ℃The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures ℃ ℃greater than 40 , the wet bulb temperature must not exceed 39 . ℃Note 3: Surface temperature is measured at 50 Dry condition
© Copyright AUO Optronics Corp. 2011 All Rights Reserved.
Page 5 / 24
T320HVN02.0 SKD Product Specification Rev.01
3. Electrical Specification
The T320HVN02.0 Open Cell Unit requires power input which is employed to power the LCD electronics and to drive the TFT array and liquid crystal.
3-1 Electrical Characteristics 3-1.1: DC Characteristics
Parameter
Symbol
LCD Power Supply Input Voltage Power Supply Input Current Inrush Current Permissible Ripple of Power Supply Input Voltage
Input Differential Voltage
LVDS Differential Input High Threshold Voltage Interface Differential Input Low Threshold Voltage
Input Common Mode Voltage
CMOS Input High Threshold Voltage Interface Input Low Threshold Voltage
VDD IDD IRUSH
VRP
∣ ∣VID
VTH
VTL
VICM VIH (High) VIL (Low)
Min.
10.8 ---200
+100 -300 1.1 2.7
0
Value Typ.
Max
12 0.39
--400 --1.25 --
--
13.2 0.56
5 600 600 +300 -100 1.4 3.3
0.6
Unit Note
VDC A A mVpk-pk mVDC mVDC mVDC VDC VDC
VDC
1 2 3 4 4 4 4 5
5
3-1.2: AC Characteristics
Parameter
LVDS Interface
Receiver Clock : Spread Spectrum Modulation range
Receiver Clock : Spread Spectrum Modulation frequency Receiver Data Input Margin
Fclk = 85 MHz Fclk = 65 MHz
Symbol Fclk_ss
Fss
Min. Fclk -3%
30
Value Typ.
--
--
Max Fclk +3%
200
Unit Note
MHz KHz
6 6
tRMG
-0.4
--
0.4
ns 7
-0.5 --
0.5
© Copyright AUO Optronics Corp. 2011 All Rights Reserved.
Page 6 / 24
T320HVN02.0 SKD Product Specification Rev.01
Note :
1. Test Condition: (1) VDD = 12.0V (2) Fv = 60Hz
℃(3) Fclk= Max freq.
(4) Temperature = 25 (5) Typ. Input current : White Pattern
Max..