Document
ALUMINUM ELECTROLYTIC CAPACITORS
KZ Premium Grade Type, For Audio Equipment series
Premium grade “nichicon MUSE” acoustic series. Ideally suited for first class audio equipment where qualitative and quantitative comfortableness is required. Compliant to the RoHS directive (2002/95/EC).
KZ
High Grade FG
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Performance Characteristics
– 40 to +85°C
25 to 100V
10 to 1000µF
± 20% at 120Hz, 20°C
After 1 minute's application of rated voltage, leakage current is 0.01CV or less.
Rated voltage (V) tan δ (MAX.)
Measurement frequency : 120Hz, Temperature : 20°C
25 50 100
0.12
0.08
0.07
Rated voltage (V)
Impedance ratio Z– 25°C / Z+20°C ZT / Z20 (MAX.) Z– 40°C / Z+20°C
Measurement frequency : 120Hz 25 50 100 222 433
Endurance
Shelf Life Marking
The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C.
Capacitance change tan δ Leakage Current
Within ±20% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with gold color letter on black sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φ 0.8 tinned copper wire
φD+0.5MAX. P±0.5
Pressure relief vent
L+ MAX.
15MIN
4MIN
(φ D < 10) 1.0 α (φ D 10) 1.5
(mm) φD 8 10 12.5 16 18 P 3.5 5.0 5.0 7.5 7.5
• Please refer to page 20 about the end seal configulation.
Dimensions
Cap.(µF) 10 22 33 47
1000 2200 3300 4700 100000
V Code
100 220 330 470 101 221 331 471 102
25 1E
8 × 11.5 10 × 12.5 10 × 16 12.5 × 20 12.5 × 25 16 × 25 16 × 35.5
50 1H
8 × 11.5 10 × 12.5 10 × 16 12.5 × 20 16 × 25 16 × 31.5 16 × 35.5 18 × 40
φ D × L (mm)
100
2A 8 × 11.5 10 × 16 10 × 20 12.5 × 20 16 × 25 16 × 35.5 18 × 35.5
Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.
Type numbering system (Example : 25V 100µF)
1 2 3 4 5 6 7 8 9 10 11
UK Z 1 E 1 0 1 M PM
Capacitance tolerance (± 20%)
Rated capacitance (100µF) Rated voltage (25V)
Series name
Type
Configuration
φD Code 8 · 10 PM 12.5 to 18 HM
CAT.8100Z
.