Document
T390HVN03.0 SKD Product Specification Rev.1.1
Model Name: T390HVN03.0
Issue Date : 2012/10/18 ()Preliminary Specifications (*)Final Specifications
(T39” FHD 60Hz Open cell)
© Copyright AU Optronics Corp. 2013 All Rights Reserved.
Page 1 / 28
T390HVN03.0 SKD Product Specification Rev.1.1
Contents
No CONTENTS RECORD OF REVISIONS
1 GENERAL DESCRIPTION 2 ABSOLUTE MAXIMUM RATINGS 3 ELECTRICAL SPECIFICATION
3-1 ELECTRIACL CHARACTERISTICS 3-2 INTERFACE CONNECTIONS 3-3 SIGNAL TIMING SPECIFICATION 3-4 SIGNAL TIMING WAVEFORM 3-5 COLOR INPUT DATA REFERENCE 3-6 POWER SEQUENCE 3-7 VCOM Adjust SOP 4 OPTICAL SPECIFICATION 5 OPEN CELL DRAWING 6 RELIABILITY TEST ITEMS 7 PACKING 7-1 OPEN CELL SHIPPING LABEL 7-2 PACKING PROCESS 7-3 PALLET AND SHIPMENT INFORMATION 8 PRECAUTION 8-1 MOUNTING PRECAUTIONS 8-2 OPERATING PRECAUTIONS 8-3 ELECTROSTATIC DISCHARGE CONTROL 8-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE 8-5 STORAGE 8-6 HANDLING PRECAUTIONS FOR PROTECT FILM
© Copyright AU Optronics Corp. 2013 All Rights Reserved.
Page 2 / 28
Version 0.0 1.0
1.1
Date 10/18 11/20
3/20
T390HVN03.0 SKD Product Specification Rev.1.1
Record of Revision
Page
Description
First release
Final release
12 Modify Timing Table
16 Modify Color Chromaticity: With CS-1000T Standard light source “C”
Add VCOM Adjust SOP
© Copyright AU Optronics Corp. 2013 All Rights Reserved.
Page 3 / 28
1. General Description
T390HVN03.0 SKD Product Specification Rev.1.1
This specification applies to the 38.5 inch Color TFT-LCD SKD model T390HVN03.0. This LCD Open Cell Unit has a TFT active matrix type liquid crystal panel 1,920x1,080 pixels, and diagonal size of 38.5 inch. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot.
The T390HVN03.0 has been designed to apply the 8-bit 2 channel LVDS interface method. It is intended to support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very important.
General Information
Items
Specification
Unit
Active Screen Size
38.5 inch
Display Area
853.92 (H) x 480.33 (V)
mm
Outline Dimension
863.92 (H) x 492.83 (V) x 1.36 (D) mm
Driver Element
a-Si TFT active matrix
Display Colors
8 bit Colors
Number of Pixels
1,920x1,080
Pixel
Pixel Pitch
0.44475 (H) x 0.44475 (W)
mm
Pixel Arrangement
RGB vertical stripe
Display Operation Mode
Normally Black
Surface Treatment
Anti-Glare, 3H
Haze=2%
Rotate Function
Unachievable
Note 1
Display Orientation
Signal input with “ABC”
Note 2
Note 1: Rotate Function refers to LCD display could be able to rotate.
Note 2: LCD display as below illustrated when signal input with “ABC”.
Note
© Copyright AU Optronics Corp. 2013 All Rights Reserved.
Page 4 / 28
2. Absolute Maximum Ratings
T390HVN03.0 SKD Product Specification Rev.1.1
The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit
Item Logic/LCD Drive Voltage Input Voltage of Signal Operating Temperature Operating Humidity Storage Temperature Storage Humidity Panel Surface Temperature
Symbol VDD Vin TOP HOP TST HST PST
Min -0.3 -0.3
0 10 -20 10
Max 14 4 +50 90 +60 90 65
Unit VDC VDC [oC] [%RH] [oC] [%RH] [oC]
Conditions Note 1 Note 1 Note 2 Note 2 Note 2 Note 2 Note 3
Note 1: Duration:50 msec. Note 2 : Maximum Wet-Bulb should be 39℃ and No condensation. The relative humidity must not exceed 90% non-condensing at temperatures of 40℃ or less. At temperatures greater than 40℃, the wet bulb temperature must not exceed 39℃. Note 3: Surface temperature is measured at 50℃ Dry condition
© Copyright AU Optronics Corp. 2013 All Rights Reserved.
Page 5 / 28
3. Electrical Specification
T390HVN03.0 SKD Product Specification Rev.1.1
The T390HVN03.0 Open Cell Unit requires power input which is employed to power the LCD electronics and to drive the TFT array and liquid crystal.
3-1 Electrical Characteristics 3-1.1: DC Characteristics
Parameter
Symbol
LCD Power Supply Input Voltage Power Supply Input Current Inrush Current Permissible Ripple of Power Supply Input Voltage
Input Differential Voltage
LVDS Differential Input High Threshold Voltage Interface Differential Input Low Threshold Voltage
Input Common Mode Voltage
CMOS Input High Threshold Voltage Interface Input Low Threshold Voltage
VDD IDD IRUSH
VRP
∣VID∣
VTH
VTL VICM VIH (High) VIL (Low)
Min.
10.8 ---200
+100 -300 1.1 2.7
0
Value Typ.
Max
Unit Note
12 0.8 --400 --1.25 --
--
13.2 1.3 4
VDC A A
VDD * 5% mVpk-pk
600 +300 -100 1.4 3.3
mVDC mVDC mVDC VDC VDC
0.6 VDC
1 2 3 4 4 4 4 5
5
3-1.2: AC Characteristics
Parameter
LVDS Interface
Receiver Clock : Spread Spectrum Modulation range
Receiver Clock : Spread Spectrum Modulation frequency Receiver Data Input Margin
Fclk = 85 MHz Fclk = 65 MHz
Symbol Fclk_ss
Fss
Min. Fclk -3%
30
Value Typ.
--
--
Max Fclk +3%
200
Unit Note
MHz .