Document
ALUMINUM ELECTROLYTIC CAPACITORS
PJ Low Impedance, For Switching Power Supplies series
Low impedance and high reliability withstanding 5000 hours load life
at +105˚C (3000 / 2000 hours for smaller case sizes as specified below).
Capacitance ranges available based on the numerical values in E12 series under JIS.
Ideally suited for use of switching power supplies.
Compliant to the RoHS directive (2011/65/EU).
PJ
Smaller
Specifications
PS
Item
Performance Characteristics
Category Temperature Range – 55 to +105˚C (6.3 to 100V), – 40 to +105˚C (160 to 400V), – 25 to +105˚C (450V)
Rated Voltage Range
6.3 to 450V
Rated Capacitance Range 0.47 to 15000µF
Capacitance Tolerance
± 20% at 120Hz, 20˚C
Rated Voltage (V)
6.3 to 100
160 to 450
Leakage Current
Leakage current
After 1 minute's application of rated voltage, leakage current is not more CV =< 1000 : I = 0.1CV+40 (µA) max. (1 minute's)
than 0.03CV or 4 (µA), whichever is greater.
CV > 1000 : I = 0.04CV+100 (µA) max. (1 minute's)
120Hz, 20˚C
Tangent of loss angle (tan δ) Rated Voltage (V) tan δ (MAX.)
6.3 0.22
10 0.19
16 0.16
25 0.14
35 0.12
50 0.10
63 to 100 160 to 350 400 • 450
0.08
0.20
0.25
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.
Rated voltage (V)
6.3 • 10 16 25 • 35 50 to 100 160 • 200 250 315 • 350 400
Stability at Low Temperature Impedance
Z– 25˚C / Z+20˚C
—
—
—
—
—
—
—
—
ratio (MAX.)
Z– 40˚C / Z+20˚C
—
—
—
—
4
6
8 10
Z– 55˚C / Z+20˚C
4
3
3
2 ————
450 120Hz 15 — —
Endurance
Shelf Life Marking
The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 5000 hours (2000 hours for φD=5 and 6.3, 3000 hours for φD=8) at 105˚C, the peak voltage shall not exceed the rated voltage.
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on dark brown sleeve.
Capacitance change Within ±20% of the initial capacitance value
tan δ
200% or less than the initial specified value
Leakage current
Less than or equal to the initial specified value
Capacitance change Within ±20% of the initial capacitance value
tan δ
150% or less than the initial specified value
Leakage current
Less than or equal to the initial specified value
Radial Lead Type
Type numbering system (Example : 25V 470µF)
φD+0.5 MAX.
Sleeve (P.E.T.)
φd
Pressure relief vent
(φ6.3up)
L+ MAX.
15MIN
4MIN
P±0.5
1 2 3 4 5 6 7 8 9 10 11 12
UP J 1 E 4 7 1 MPD
Configuration Capacitance tolerance (±20%)
Rated capacitance (470µF) Rated voltage (25V) Series name Type
Type Small Dia Low Profile
Code
6 Size code
Configuration
φD
Pb-free leadwire Pb-free PET sleeve
5 DD
6.3 ED
8 • 10
PD
12.5 to 18
HD
(φD < 10) 1.0 (φD 10) 1.5
(mm) φD 5 6.3 8 10 12.5 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8
In case L >25 for the φ12.5 dia. unit, lead dia. φ d=0.8mm.
Rated voltage
Frequency coefficient of rated ripple current
Rated voltage
• Please refer to page 20 about the end seal configuration.
6.3 to 100V
(10kHz to 200kHz = 1)
Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.
Dimension table in next pages.
160 to 450V
Frequency coefficient
Cap.(µF)
15000
1001050000 681000000 47060800 4700 3300 3300 22020200 15010500 10010000 680 680 470 470330 220 150 100 68 47 33 22 15 10 0.68 0.47
0
Frequency coefficient
120Hz
300Hz
1kHz
0.5 0.6 0.7 0.8 Frequency coefficient
0.9
1.0
50Hz 0.80
120Hz 1.00
300Hz 1.25
1kHz 1.40
10kHz or more 1.60
CAT.8100C
ALUMINUM ELECTROLYTIC CAPACITORS
PJ series
Dimensions
Cap. (µF)
22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000
V (Code) CodeSize code
220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153
6.3 (0J) —6
5 × 11 5 × 11 6.3 × 11 6.3 × 11 6.3 × 11 6.3 × 15 6.3 × 15 8 × 11.5 8 × 15 8 × 15 8 × 20 8 × 20 10 × 20 10 × 20 10 × 25 10 × 31.5 10 × 31.5 12.5 × 25 12.5 × 25 12.5 × 31.5 12.5 × 35.5 12.5 × 40 16 × 31.5 16 × 35.5 16 × 40 18 × 35.5 18 × 40
10 × 12.5 10 × 12.5 10 × 15 10 × 15 12.5 × 15 12.5 × 15 12.5 × 15 16 × 15 16 × 15 18 × 15 18 × 15 16 × 20 18 × 20 18 × 20 18 × 25 18 × 31.5 18 × 31.5
10 (1A) —6
5 × 11 5 × 11 6.3 × 11 6.3 × 11 6.3 × 11 6.3 × 11 6.3 × 15 6.3 × 15 8 × 11.5 8 × 15 8 × 15 8 × 20 8 × 20 10 × 20 10 × 20 10 × 25 10 × 31.5 12.5 × 20 12.5 × 25 12.5 × 31.5 12.5 × 35.5 12.5 × 40 16 × 31.5 16 × 35.5 16 × 35.5 16 × 40 18 × 40
10 × 12.5 10 × 12.5 10 × 15 10 × 15 12.5 × 15 12.5 × 15 12.5 × 15 16 × 15 16 × 15 18 × 15 16 × 20 16 × 20 18 × 20 18 × 25 18 × 25 18 × 31.5 1.