DatasheetsPDF.com

UPJ1E332MPD Dataheets PDF



Part Number UPJ1E332MPD
Manufacturers Nichicon
Logo Nichicon
Description ALUMINUM ELECTROLYTIC CAPACITORS
Datasheet UPJ1E332MPD DatasheetUPJ1E332MPD Datasheet (PDF)

ALUMINUM ELECTROLYTIC CAPACITORS PJ Low Impedance, For Switching Power Supplies series Low impedance and high reliability withstanding 5000 hours load life at +105˚C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges available based on the numerical values in E12 series under JIS. Ideally suited for use of switching power supplies. Compliant to the RoHS directive (2011/65/EU). PJ Smaller Specifications PS Item Performance Characteristics Category Temper.

  UPJ1E332MPD   UPJ1E332MPD



Document
ALUMINUM ELECTROLYTIC CAPACITORS PJ Low Impedance, For Switching Power Supplies series Low impedance and high reliability withstanding 5000 hours load life at +105˚C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges available based on the numerical values in E12 series under JIS. Ideally suited for use of switching power supplies. Compliant to the RoHS directive (2011/65/EU). PJ Smaller Specifications PS Item Performance Characteristics Category Temperature Range – 55 to +105˚C (6.3 to 100V), – 40 to +105˚C (160 to 400V), – 25 to +105˚C (450V) Rated Voltage Range 6.3 to 450V Rated Capacitance Range 0.47 to 15000µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Rated Voltage (V) 6.3 to 100 160 to 450 Leakage Current Leakage current After 1 minute's application of rated voltage, leakage current is not more CV =< 1000 : I = 0.1CV+40 (µA) max. (1 minute's) than 0.03CV or 4 (µA), whichever is greater. CV > 1000 : I = 0.04CV+100 (µA) max. (1 minute's) 120Hz, 20˚C Tangent of loss angle (tan δ) Rated Voltage (V) tan δ (MAX.) 6.3 0.22 10 0.19 16 0.16 25 0.14 35 0.12 50 0.10 63 to 100 160 to 350 400 • 450 0.08 0.20 0.25 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) 6.3 • 10 16 25 • 35 50 to 100 160 • 200 250 315 • 350 400 Stability at Low Temperature Impedance Z– 25˚C / Z+20˚C — — — — — — — — ratio (MAX.) Z– 40˚C / Z+20˚C — — — — 4 6 8 10 Z– 55˚C / Z+20˚C 4 3 3 2 ———— 450 120Hz 15 — — Endurance Shelf Life Marking The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 5000 hours (2000 hours for φD=5 and 6.3, 3000 hours for φD=8) at 105˚C, the peak voltage shall not exceed the rated voltage. After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on dark brown sleeve. Capacitance change Within ±20% of the initial capacitance value tan δ 200% or less than the initial specified value Leakage current Less than or equal to the initial specified value Capacitance change Within ±20% of the initial capacitance value tan δ 150% or less than the initial specified value Leakage current Less than or equal to the initial specified value Radial Lead Type Type numbering system (Example : 25V 470µF) φD+0.5 MAX. Sleeve (P.E.T.) φd Pressure relief vent (φ6.3up) L+ MAX. 15MIN 4MIN P±0.5 1 2 3 4 5 6 7 8 9 10 11 12 UP J 1 E 4 7 1 MPD Configuration Capacitance tolerance (±20%) Rated capacitance (470µF) Rated voltage (25V) Series name Type Type Small Dia Low Profile Code 6 Size code Configuration φD Pb-free leadwire Pb-free PET sleeve 5 DD 6.3 ED 8 • 10 PD 12.5 to 18 HD (φD < 10) 1.0 (φD 10) 1.5 (mm) φD 5 6.3 8 10.


UPJ1E332MHD UPJ1E332MPD UPJ1E391MPD


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)