Document
ALUMINUM ELECTROLYTIC CAPACITORS
LG Snap-in Terminal Type, 85°C Smaller-Sized series
One rank smaller case sized than LN series. Suited for equipment down sizing. Compliant to the RoHS directive (2002/95/EC).
LS
Smaller
LG
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current
Performance Characteristics – 40 to + 85°C (160 to 250V), – 25 to + 85°C (400 to 450V) 160 to 450V 120 to 3900µF ± 20% at 120Hz, 20°C I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
Tangent of loss angle (tan δ)
Rated voltage (V) tan δ (MAX.)
160 to 400 0.15
450 0.20
Measurement frequency : 120Hz, Temperature : 20°C
Stability at Low Temperature
Rated voltage(V)
Impedance ratio ZT/Z20 (MAX.)
Z – 25°C/ Z+20°C
160 to 250 4
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 85°C, the peak voltage shall not exceed the rated voltage.
400 • 450 8
Measurement frequency : 120Hz
Capacitance change tan δ Leakage current
Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life Marking
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the characteristic requirements listed at right.
Printed with white color letter on black sleeve.
Capacitance change tan δ Leakage current
Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Drawing
Polarity bar Sleeve (P.E.T.)
φ D +1.5MAX.
L±2 Pressure relief vent
4.0±0.5
10
10± 0.1
0.8+-00..12
0.8+-00.2.1
4.0±0.5 2.5
2-2φ±0.1
1.5
+0.2 -0.1
(PC board hole dimensions) (Terminal dimensions)
The other terminal is also available upon request. Please refer to page 272 for schematic of dimensions.
Minimum order quantity : 50pcs. Dimension table in next page.
Type numbering system ( Example : 400V 180µF )
1 2 3 4 5 6 7 8 9 10 11 12 13 14
L LG 2G 1 8 1 ME L A 2 5
Configuration Capacitance tolerane (±20%) Rated capacitance (180µF)
Rated voltage (400V) Series name Type
Case length code
Case dia.code
φ D Code 22 Z 25 A 30 B 35 C
CAT.8100Z
ALUMINUM ELECTROLYTIC CAPACITORS
LGseries
Dimensions
Cap. (µF) 560 680 820 1000
1200
1500
1800
2200 2700 3300 3900
Size
φD × L(mm)
22 × 25 22 × 30 22 × 35 25 × 25 22 × 40 25 × 30 22 × 40 25 × 35 30 × 25 22 × 50 25 × 40 30 × 30 35 × 25 25 × 45 30 × 35 35 × 30 30 × 40 35 × 35 30 × 45 35 × 40 35 × 45 35 × 50
160V (2C)
Rated ripple Leakage Current
(mA)
(mA)
2250
0.89
2500
0.98
2750
1.08
2520
1.08
3000
1.20
3000
1.20
3050
1.31
3250
1.31
3050
1.31
3400
1.46
3400
1.46
3400
1.46
3400
1.46
3800
1.60
4200
1.60
4100
1.60.