DatasheetsPDF.com

LLS1C473MELB Dataheets PDF



Part Number LLS1C473MELB
Manufacturers Nichicon
Logo Nichicon
Description ALUMINUM ELECTROLYTIC CAPACITORS
Datasheet LLS1C473MELB DatasheetLLS1C473MELB Datasheet (PDF)

ALUMINUM ELECTROLYTIC CAPACITORS LS Snap-in Terminal Type, 85°C Standard series Withstanding 3000 hours application of rated ripple current at 85°C. Compliant to the RoHS directive (2002/95/EC). LS Smaller LG Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) Stability at Low Temperature Performance Characteristics – 40 to +85°C (16 to 250V), – 25 to +85°C (350 to 450V) 16 to 450V 5.

  LLS1C473MELB   LLS1C473MELB



Document
ALUMINUM ELECTROLYTIC CAPACITORS LS Snap-in Terminal Type, 85°C Standard series Withstanding 3000 hours application of rated ripple current at 85°C. Compliant to the RoHS directive (2002/95/EC). LS Smaller LG Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) Stability at Low Temperature Performance Characteristics – 40 to +85°C (16 to 250V), – 25 to +85°C (350 to 450V) 16 to 450V 56 to 56000µF ± 20% at 120Hz, 20°C I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] Measurement frequency :120Hz, Temperature : 20°C Rated voltage (V) tan δ (MAX.) 16 0.50 25 0.40 35 0.35 50 0.30 63 0.25 80 0.20 100 0.20 160 0.15 180 0.15 200 0.15 250 0.15 350 0.15 400 0.15 450 0.20 Rated voltage (V) Impedance ratio Z – 25°C/ Z+20°C ZT/Z20(MAX.) Z – 40°C/ Z+20°C 16 to 100 4 20 Measurement frequency : 120Hz 160 to 250 350 to 450 38 12 — Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 3000 hours at 85°C, the peak voltage shall not exceed the rated voltage. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Shelf Life Marking After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the requirements listed at right. Printed with white color letter on black sleeve. Capacitance change tan δ Leakage current Within ±15% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value φ D+1MAX. 4.0±0.5 2.5 Drawing Polarity bar Sleeve (P.E.T.) L±2 Pressure relief vent 10 ±0.1 10 4.0±0.5 0.8 +0.2 -0.1 0.8+-00.2.1 Type numbering system ( Example : 200V 390µF) 1 2 3 4 5 6 7 8 9 10 11 12 L L S 2 D 3 9 1 ME L Z Configuration Capacitance tolerane(±20%) Rated capacitance(390µF) Rated voltage(200V) Series name Type Case dia.code φ D Code 20 Y 22 Z 25 A 30 B 35 C 2-2φ ±0.1 1.5 +0.2 -0.1 (PC board hole dimensions) (Terminal dimensions) The other terminal is also available upon request. Please refer to page 272 for schematic of dimensions. Frequency coefficient of rated ripple current Frequency (Hz) 50 60 120 300 16 to 100V 0.88 0.90 1.00 1.07 160 to 250V 0.81 0.85 1.00 1.17 350 to 450V 0.77 0.82 1.00 1.16 Coeff. Minimum order quantity : 50pcs. 1k 1.15 1.32 1.30 10k 1.15 1.45 1.41 50k or more 1.15 1.50 1.43 Dimension table in next page. CAT.8100Z ALUMINUM ELECTROLYTIC CAPACITORS LS series Dimensions Cap. (µF) 8200 10000 12000 15000 18000 22000 27000 33000 39000 47000 56000 Size φD × L(mm) 22 × 25 22 × 30 22 × 30 25 × 25 22 × 35 25 × 30 30 × 25 22 .


LLS1C393MELC LLS1C473MELB LLS1C473MELC


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)