Document
ALUMINUM ELECTROLYTIC CAPACITORS
MA 5mmL, Standard, For General Purposes series
Standard series with 5mm height. Compliant to the RoHS directive (2002/95/EC).
MV Long Life
MT
High Te m p e r a t u re
Specifications
MF Low Impedance
MA
Bi-polarized MP
Item
Performance Characteristics
Category Temperature Range – 40 to +85°C
Rated Voltage Range
4 to 50V
Rated Capacitance Range 0.1 to 470µF
Rated Capacitance Tolerance Leakage Current
Tangent of loss angle (tan δ)
± 20% at 120Hz, 20°C
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3(µA), whichever is greater.
Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage (V) tan δ (MAX.)
4 0.35
6.3 10 16 25 35 50 Figures in ( ) are for 0.24 (0.30) 0.20 (0.24) 0.16 (0.20) 0.14 (0.18) 0.12 (0.16) 0.10 (0.13) MR series.
Measurement frequency : 120Hz
Rated voltage (V)
4 6.3 10 16 25 35 50
Stability at Low Temperature Impedance ratio Z– 25°C / Z+20°C
7
4
3
2
2
2
2
ZT / Z20 (MAX.) Z– 40°C / Z+20°C 15
8
6
4
4
3
3
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value (MR series & φ 3 product : Within ±25%) 200% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life Marking
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on black sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
(φ3: P±0.3 )
φ D+0.5 MAX. P ± 0.5
L+1MAX.
15 MIN
4 MIN
(mm) φ D 3 4 5 6.3 8 P 1.0 1.5 2.0 2.5 2.5 φ d 0.4 0.45 0.45 0.45 0.45
• Please refer to page 20 about the end seal configulation.
Dimensions
Type numbering system (Example : 25V 10µF)
1 2 3 4 5 6 7 8 9 10 11 12
UMA 1 E 1 0 0 M DD
2 Size code
φD 3 4 to 8
Code 2
—
Configuration 1
Capacitance tolerance (± 20%)
Rated capacitance (10µF)
Rated voltage (25V)
Series name
1 Configuration
φD
Pb-free leadwire Pb-free PET sleeve
3 CD
4 to 8
DD
2 In case at φ 3 units, put 2 as size code.
Type
Cap.(µF) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7
10 22 33 47 100 220 330 470
V Code
0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471
4 0G
0.3 × 5 0.4 × 5 0.4 × 5 0.5 × 5 6.3 × 5 0.8 × 5 0.8 × 5
19 28 33 56 96 145 185
6.3 10 0J 1A
0.3 × 5 0.4 × 5 0.5 × 5 0.5 × 5 6.3 × 5 0.8 × 5 0.8 × 5
15 28(21)
37 45 70(68) 110(90) 170
0.5 × 5 0.5 × 5 6.3 × 5 0.8 × 5 0.8 × 5
33 41 52(43)
80(76) 135
16 1C
0.3 × 5 0.4 × 5 0.5 × 5 6.3 × 5 6.3 × 5 0.8 × 5
10 23(18)
37 49(43)
58 92(86)
25 1E
0.3 × 5 0.4 × 5 0.5 × 5 6.3 × 5 6.3 × 5 0.8 × 5 0.8 × 5
10 16(12)
27 42 52 70(62) 110
35 1V
0.3 × 5 0.4 × 5 0.4 × 5 0.5 × 5 6.3 × 5 0.8 × 5 0.8 × 5
8.4 15(10)
18.