DatasheetsPDF.com

UMA1C100MCD Dataheets PDF



Part Number UMA1C100MCD
Manufacturers Nichicon
Logo Nichicon
Description ALUMINUM ELECTROLYTIC CAPACITORS
Datasheet UMA1C100MCD DatasheetUMA1C100MCD Datasheet (PDF)

ALUMINUM ELECTROLYTIC CAPACITORS MA 5mmL, Standard, For General Purposes series Standard series with 5mm height. Compliant to the RoHS directive (2002/95/EC). MV Long Life MT High Te m p e r a t u re Specifications MF Low Impedance MA Bi-polarized MP Item Performance Characteristics Category Temperature Range – 40 to +85°C Rated Voltage Range 4 to 50V Rated Capacitance Range 0.1 to 470µF Rated Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) ± 20% at 120Hz, 20°C .

  UMA1C100MCD   UMA1C100MCD


Document
ALUMINUM ELECTROLYTIC CAPACITORS MA 5mmL, Standard, For General Purposes series Standard series with 5mm height. Compliant to the RoHS directive (2002/95/EC). MV Long Life MT High Te m p e r a t u re Specifications MF Low Impedance MA Bi-polarized MP Item Performance Characteristics Category Temperature Range – 40 to +85°C Rated Voltage Range 4 to 50V Rated Capacitance Range 0.1 to 470µF Rated Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) ± 20% at 120Hz, 20°C After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3(µA), whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ (MAX.) 4 0.35 6.3 10 16 25 35 50 Figures in ( ) are for 0.24 (0.30) 0.20 (0.24) 0.16 (0.20) 0.14 (0.18) 0.12 (0.16) 0.10 (0.13) MR series. Measurement frequency : 120Hz Rated voltage (V) 4 6.3 10 16 25 35 50 Stability at Low Temperature Impedance ratio Z– 25°C / Z+20°C 7 4 3 2 2 2 2 ZT / Z20 (MAX.) Z– 40°C / Z+20°C 15 8 6 4 4 3 3 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value (MR series & φ 3 product : Within ±25%) 200% or less than the initial specified value Less than or equal to the initial specified value Shelf Life Marking After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on black sleeve. Radial Lead Type Sleeve (P.E.T.) φd (φ3: P±0.3 ) φ D+0.5 MAX. P ± 0.5 L+1MAX. 15 MIN 4 MIN (mm) φ D 3 4 5 6.3 8 P 1.0 1.5 2.0 2.5 2.5 φ d 0.4 0.45 0.45 0.45 0.45 • Please refer to page 20 about the end seal configulation. Dimensions Type numbering system (Example : 25V 10µF) 1 2 3 4 5 6 7 8 9 10 11 12 UMA 1 E 1 0 0 M DD 2 Size code φD 3 4 to 8 Code 2 — Configuration 1 Capacitance tolerance (± 20%) Rated capacitance (10µF) Rated voltage (25V) Series name 1 Configuration φD Pb-free leadwire Pb-free PET sleeve 3 CD 4 to 8 DD 2 In case at φ 3 units, put 2 as size code. Type Cap.(µF) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 V Code 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 4 0G 0.3 × 5 0.4 × 5 0.4 × 5 0.5 × 5 6.3 × 5 0.8 × 5 0.8 × 5 19 28 33 56 96 145 185 6.3 10 0J 1A 0.3 × 5 0.4 × 5 0.5 × 5 0.5 × 5 6.3 × 5 0.8 × 5 0.8 × 5 15 28(21) 37 45 70(68) 110(90) 170 0.5 × 5 0.5 × 5 6.3 × 5 0.8 × 5 0.8 × 5 33 41 52(43) 80(76) 135 16 1C 0.3 × 5 0.4 × 5 0.5 × 5 6.3 × 5 6.3 × 5 0.8 × 5 10 23(18) 37 49(43) 58 92(86) 25 1E 0.3 × 5 0.4 × 5 0.5 × 5 6.3 × 5 6.3 × 5 0.8 × 5 0.8 × 5 10 16(12) 27 42 52 70(62) 110 35 1V 0.3 × 5 0.4 × 5 0.4 × 5 0.5 × 5 6.3 × 5 0.8 × 5 0.8 × 5 8.4 15(10) 18 29 46 62(52) 80 50 1H 4 × 5(3 × 5) 1.0(1.0) 4 × 5(3 × 5) 2.0(2.0) 4 × 5(3 × 5) 2.8(2.8) 4 × 5(3 × 5) 4.0(4.0) 4 × 5(3 × 5) 8.4(8.0) 0.4 × 5 13(10) 0.4 × 5 17 0.5 × 5 20 6.3 × 5 33 0.8 × 5 52(48) 0.8 × 5 71 Case size Rated φ D × L (mm) ripple Size φ3 × 5 is available for capacitors marked. " "/ Size φ5 × 5 is available for capacitors marked. " " Size φ6.3 × 5 is available for capacitors marked. " " In such a case, M R will be put at 2nd and 3rd digit of type numbering system. Frequency coefficient of rated ripple current Rated ripple current (mArms) at 85°C 120Hz ( ) = φ3 units and MR series. Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 10 kHz or more 1.36 1.50 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100Z .


UMA1A471MDD UMA1C100MCD UMA1C100MDD


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)