Uniform Sector Dual and Quad Serial Flash
25Q16BSIG
FEATURES
◆ 16M-bit Serial Flash -2048K-byte -256 bytes per programmable page
◆ Standard, Dual, Quad SPI -Stan...
Description
25Q16BSIG
FEATURES
◆ 16M-bit Serial Flash -2048K-byte -256 bytes per programmable page
◆ Standard, Dual, Quad SPI -Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD# -Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD# -Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3
◆ High Speed Clock Frequency -120MHz for fast read with 30PF load -Dual I/O Data transfer up to 180Mbits/s -Quad I/O Data transfer up to 360Mbits/s
◆ Program/Erase Speed -Page Program time: 0.7ms typical -Sector Erase time: 100ms typical -Block Erase time: 0.3/0.4/0.8s typical -Chip Erase time: 16s typical
◆ Flexible Architecture -Sector of 4K-byte -Block of 32/64/128K-byte
◆ Low Power Consumption -20mA maximum active current -5uA maximum power down current
◆ Software/Hardware Write Protection -Write protect all/portion of memory via software -Enable/Disable protection with WP# Pin -Top or Bottom, Sector or Block selection
◆ Minimum 100,000 Program/Erase Cycles Note: 1.Please contact Gigadevice for details.
◆ Advanced security Features(1) -16-Bit Customer ID -Security Architecture
◆ Single Power Supply Voltage -Full voltage range:2.7~3.6V
GENERAL DESCRIPTION
The GD25Q16 (16M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), and I/O3 (HOLD#). The Dual I/O data is transferred with speed of 180Mbits/s and the Quad I/O & Quad output data is transferred with speed of 360Mbits/s.
CONNECTION DIAGRAM
CS# 1
8
...
Similar Datasheet