SM8100

SM8100 SMR11GGXFRKG/US-100 Flow sensors Made in Germany Product characteristics Magnetic-inductive flow sensor Connector Process connection: G1 flat seal Function programmable Totalizer function 2 outputs OUT1 = flow monitoring (binary), flow rate meter (pulse), preset meter (binary) OUT2 = flow monitoring or temperature monitoring (analogue or binary) Input for counter reset connection to pipe by means of an adapter Measuring range 0.2...100 l/min -20...80°C Application Application Conductive liquids (conductivity:>= 20 µS/cm / viscosity: < 70 mm²/s at 40 °C) Medium temperature [°C] -10...70 Electrical data Electrical design DC PNP/NPN Operating voltage [V] 19...30 DC ¹) Current consumption [mA] 120 Insulation resistance [MΩ] > 100 (500 V DC) Protection class III Reverse polarity protection yes Outputs Output function OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scaleable) Current rating [mA] 2 x 200 Voltage drop [V] <2 Short-circuit protection pulsed Overload protection yes Analogue output 4...20 mA; 0...10 V Max. load [Ω] max. 500 / min. 2000 Pulse output flow rate meter Measuring / setting range SM8100 SMR11GGXFRKG/US-100 Flow monitoring Measuring range Display range Resolution Set point, SP Reset point, rP Analogue start point, ASP Analogue end point, AEP in steps of Volumetric flow quantity monitoring Pulse value Pulse leng...