Document
ALUMINUM ELECTROLYTIC CAPACITORS
MF 5mmL, Low Impedance series
Low impedance over wide temperature range of – 55 to +105°C, with 5mm height. Suited for DC-DC converters where smaller case size and lower impedance are required. Compliant to the RoHS directive (2002/95/EC).
MF
Low Impedance
MT
Specifications
Item
Performance Characteristics
Category Temperature Range
– 55 to +105°C
Rated Voltage Range
6.3 to 35V
Rated Capacitance Range 1 to 100µF
Rated Capacitance Tolerance ± 20% at 120Hz, 20°C
Leakage Current Tangent of loss angle (tan δ)
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater.
Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage (V) tan δ (MAX.)
6.3 0.22
10 0.20
16 0.18
25 0.14
35 0.12
Stability at Low Temperature
Rated voltage (V)
Impedance ratio ZT / Z20 (MAX.)
Z– 25°C / Z+20°C Z– 55°C / Z+20°C
6.3 2 4
Measurement frequency : 120Hz
10 16 25 35 2222 4333
Endurance
Shelf Life Marking
The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
After storig the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on dark brown sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
Type numbering system (Example : 25V 10µF)
1 2 3 4 5 6 7 8 9 10 11
UMF 1 E 1 0 0 M DD
φ D+0.5 MAX P ± 0.5
L+1MAX
15 MIN
4 MIN
(mm) φ D 4 5 6.3 P 1.5 2.0 2.5 φ d 0.45 0.45 0.45
Configuration
φD
Pb-free leadwire Pb-free PET sleeve
4 to 6.3
DD
Configuration Capacitance tolerance (± 20%)
Rated capacitance (10µF) Rated voltage (25V) Series name Type
Dimensions
Cap.(µF) 1 1.5 2.2 3.3 4.7 6.8
10 15 22 33 47 68 100
V Code
010 1R5 2R2 3R3 4R7 6R8 100 150 220 330 470 680 101
4×5 5×5 5×5 6.3 × 5 6.3 × 5
6.3 0J
5.0 2.6 2.6 1.3 1.3
50 5 × 5 80 5 × 5 80 6.3 × 5 115
115
Frequency coefficient of rated ripple current
Frequency
50 Hz 120 Hz 300 Hz 1 kHz
Coefficient
0.35 0.50 0.64 0.83
10 1A
4×5 5×5 2.6 80 5 × 5 2.6 80 6.3 × 5 1.3 115 6.3 × 5
10 kHz or more 1.00
16 25 35
1C 1E 1V
4 × 5 5.0
50
4 × 5 5.0
50
4 × 5 5.0
50
4 × 5 5.0
50
4 × 5 5.0 50 4 × 5 5.0 50
4 × 5 5.0 50 5 × 5 2.6 80
5.0 50 5 × 5 2.6 80 5 × 5 2.6 80
2.6 80 6.3 × 5 1.3 115 6.3 × 5 1.3 115
2.6 80 6.3 × 5 1.3 115 6.3 × 5 1.3 115
1.3 115 6.3 × 5 1.3 115
1.3 115
Case size φD×L (mm)
Impedance
Rated ripple
Max. Impedance (Ω) at 20°C 100kHz Rated ripple current (mArms) at 105°C 100kHz
Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.
CAT.8100Z
.