Document
T500HVD02.3 SKD Product Specification Rev.0.0
Model Name: T500HVD02.3
Issue Date: 2013/9/12 (*)Preliminary Specifications ( ) Final Specifications
Customer Signature
Date AUO
Date
Approved By _________________________________
Approval By PM Director CP Wang ____________________________________
Note
Reviewed By RD Director Eugene Chen ____________________________________ Reviewed By Project Leader Ethan YS Lin ____________________________________
Prepared By PM Daphne Tang ____________________________________
© Copyright AU Optronics Corp. 2013 All Rights Reserved.
Page 1 / 26
T500HVD02.3 SKD Product Specification Rev.0.0
Contents
No CONTENTS RECORD OF REVISIONS
1 GENERAL DESCRIPTION 2 ABSOLUTE MAXIMUM RATINGS 3 ELECTRICAL SPECIFICATION
3-1 ELECTRIACL CHARACTERISTICS 3-2 INTERFACE CONNECTIONS 3-3 SIGNAL TIMING SPECIFICATION 3-4 SIGNAL TIMING WAVEFORM 3-5 COLOR INPUT DATA REFERENCE 3-6 POWER SEQUENCE 4 OPTICAL SPECIFICATION 5 MECHANICAL CHARACTERISTICS 6 PACKING 6-1 DEFINITION OF LABELS 6-2 PACKING METHODS 6-3 PALLET AND SHIPMENT INFORMATION 7 PRECAUTION 7-1 MOUNTING PRECAUTIONS 7-2 OPERATING PRECAUTIONS 7-3 ELECTROSTATIC DISCHARGE CONTROL 7-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE 7-5 STORAGE 7-6 HANDLING PRECAUTIONS FOR PROTECT FILM
© Copyright AU Optronics Corp. 2013 All Rights Reserved.
Page 2 / 26
Record of Revision
Version
Date
0.0 2013/9/12
Page First release
T500HVD02.3 SKD Product Specification Rev.0.0
Description
© Copyright AU Optronics Corp. 2013 All Rights Reserved.
Page 3 / 26
1. General Description
T500HVD02.3 SKD Product Specification Rev.0.0
This specification applies to the 50 inch Color TFT-LCD SKD model T500HVD02.3. This LCD Open Cell Unit has a TFT active matrix type liquid crystal panel 1,920 x 1,080 pixels, and diagonal size of 50 inch. This Open Cell Unit supports 1,920 x 1,080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 10-bit gray scale signal for each dot.
* General Information
Items
Specification
Unit
Note
Active Screen Size
50 inch
Display Area
1095.8 (H) x 616.4(V)
mm
Outline Dimension
1105.8(H) x 677.4 (V) x 1.3 (D)
mm D: cell thickness
Driver Element
a-Si TFT active matrix
Bezel Opening
1097.8 (H) x 618.4 (V)
mm Recommend
Display Colors
1.07 bn
Colors 10-bit
Number of Pixels
1,920x1,080
Pixel
Pixel Pitch
0.57 (H) x 0.57(W)
mm
Pixel Arrangement
RGB vertical stripe
Display Operation Mode
Normally Black
Surface Treatment
Anti-Glare, 3H
Haze=2%
Rotate Function
Unachievable
Note 1
Weight
Typ. 2100
g
Display Orientation
Signal input with “ABC”
Note 2
Note 1: Rotate Function refers to LCD display could NOT be able to rotate.
Note 2: LCD display as below illustrated when signal input with “ABC”.
© Copyright AU Optronics Corp. 2013 All Rights Reserved.
Page 4 / 26
2. Absolute Maximum Ratings
T500HVD02.3 SKD Product Specification Rev.0.0
The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit
Item Logic/LCD Drive Voltage Input Voltage of Signal Operating Temperature Operating Humidity Storage Temperature Storage Humidity Panel Surface Temperature
Symbol Vcc Vin TOP HOP TST HST PST
Min -0.3 -0.3
0 10 -20 10
Max 14 4
+50 90 +60 90 65
Unit [Volt] [Volt] [oC] [%RH] [oC] [%RH] [oC]
Conditions Note 1 Note 1 Note 2 Note 2 Note 2 Note 2 Note 3
Note 1: Duration: 50 msec.
℃Note 2: Maximum Wet-Bulb should be 39 and No condensation. ℃The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures ℃ ℃greater than 40 , the wet bulb temperature must not exceed 39 . ℃Note 3: Surface temperature is measured at 50 Dry condition
© Copyright AU Optronics Corp. 2013 All Rights Reserved.
Page 5 / 26
3. Electrical Specification
T500HVD02.3 SKD Product Specification Rev.0.0
The T500HVD02.3 Open Cell Unit requires power input which is employed to power the LCD electronics and to drive the TFT array and liquid crystal.
3.1 Electrical Characteristics
3.1.1: DC Characteristics
Parameter
LCD Power Supply Input Voltage Power Supply Input Current Power Consumption Inrush Current Permissible Ripple of Power Supply Input Voltage
Input Differential Voltage
LVDS Differential Input High Threshold Voltage Interface Differential Input Low Threshold Voltage
Input Common Mode Voltage
CMOS Input High Threshold Voltage Interface Input Low Threshold Voltage
Symbol
VDD IDD PC IRUSH VRP
∣ ∣VID
VTH
VTL VICM VIH (High) VIL (Low)
Min.
10.8 ----200
+100 -300 1.1 2.7
0
Value Typ.
Max
Unit Note
12 0.93 11.16
--400
--
-1.25
--
13.2 1.12 13.39
5 VDD * 5%
600
VDC A Watt A mVpk-pk mVDC
+300
mVDC
-100 1.4
mVDC VDC
3.3 VDC
-- 0.6 VDC
1 1 2 3 4 4 4 4 5
5
3.1.2: AC Characteristics
Parameter
LVDS Interface
Input Channel Pair Skew Margin
Receiver Clock : Spread Spectrum Modulation range Receiver Clock : Spread Spectrum.