Document
T576DC01 V0 Product Specification Rev.0 2
Model Name: T576DC01 V0
Issue Date : 2011/01/17 ( ) Preliminary Specifications (*) Final Specifications
Customer Signature
Date AUO
Date
Approved By _________________________________
Approval By PM Director Yen Ting Chiu ____________________________________
Note
Reviewed By RD Director Eugene CC Chen ____________________________________ Reviewed By Project Leader Kevin YT Lee ____________________________________
Prepared By PM Chris Huang ____________________________________
© Copyright AUO Optronics Corp. 2009 All Rights Reserved.
Page 1 / 37
Contents
T576DC01 V0 Product Specification Rev.0 2
No CONTENTS RECORD OF REVISIONS
1 GENERAL DESCRIPTION 2 ABSOLUTE MAXIMUM RATINGS 3 ELECTRICAL SPECIFICATION
3-1 ELECTRIACL CHARACTERISTICS 3-2 INTERFACE CONNECTIONS 3-3 SIGNAL TIMING SPECIFICATION 3-4 SIGNAL TIMING WAVEFORM 3-5 COLOR INPUT DATA REFERENCE 3-6 POWER SEQUENCE 3-7 BACKLIGHT SPECIFICATION 4 OPTICAL SPECIFICATION 5 MECHANICAL CHARACTERISTICS 6 RELIABILITY TEST ITEMS 7 INTERNATIONAL STANDARD 7-1 SAFETY 7-2 EMC 8 PACKING 8-1 DEFINITION OF LABEL 8-2 PACKING METHODS 8-3 PALLET AND SHIPMENT INFORMATION 9 PRECAUTION 9-1 MOUNTING PRECAUTIONS 9-2 OPERATING PRECAUTIONS 9-3 ELECTROSTATIC DISCHARGE CONTROL 9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE 9-5 STORAGE 9-6 HANDLING PRECAUTIONS FOR PROTECT FILM
© Copyright AUO Optronics Corp. 2009 All Rights Reserved.
Page 2 / 37
Record of Revision
T576DC01 V0 Product Specification Rev.0 2
Version
Date
Page
Description
0.0 2010/12/01
First release
0.1 2010/12/22 6
Revised Idd typ=2.0, Idd max=2.5 A
6 Revised Pc typ=24W, Pc max=30W
6 Revised Irush max=3.0 A
6 Revised Pbl min=138, typ=147, max=156 W
19 Revised Iddb typ=6.13, max=6.5 A
19 Revised Pddb typ=147, max=156 W
37 0.2 2011/1/17 20
Revised δWHITE(9P) =1.33 Revised Vdim from 0 to 0.3V
© Copyright AUO Optronics Corp. 2009 All Rights Reserved.
Page 3 / 37
1. General Description
T576DC01 V0 Product Specification Rev.0 2
This specification applies to the 57.6 inch Color TFT-LCD Module T576DC01 V0. This LCD module has a TFT active matrix type liquid crystal panel 2,560x1,080 pixels, and diagonal size of 57.6 inch. This module supports 2,560x1,080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 10-bit gray scale signal for each dot.
The T576DC01 V0 has been designed to apply the 10-bit 8 channel LVDS interface method. It is intended to support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very important. Also, 3D function is also embedded into front glass as pattern retarder.
* General Information
Items
Specification
Unit
Note
Active Screen Size
57.64
inch
Display Area
1349.76(H) x 569.43(V)
mm
Outline Dimension
1410.7(H) x 628.5 (V) x 12.8(D)
mm D: front bezel to T-con cover
Driver Element
a-Si TFT active matrix
Bezel Opening
1358.7 (H) x 575.4 (V)
mm
Display Colors
10 bit, 1.07B
Colors
Number of Pixels
2,560x1,080
Pixel
Pixel Pitch
0.52725 (H) x 0.52725 (W)
mm
Pixel Arrangement
RGB vertical stripe
Display Operation Mode
Normally Black
Rotate Function
Achievable
Note 1
Note 1: Rotate Function refers to LCD display could be able to rotate.
© Copyright AUO Optronics Corp. 2009 All Rights Reserved.
Page 4 / 37
2. Absolute Maximum Ratings
T576DC01 V0 Product Specification Rev.0 2
The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit
Item Logic/LCD Drive Voltage Input Voltage of Signal BLU Input Voltage BLU on/off Control Voltage BLU Brightness Control Voltage Operating Temperature Operating Humidity Storage Temperature Storage Humidity Panel Surface Temperature
Symbol Vcc Vin
VDDB VBLON Vdim TOP HOP TST HST PST
Min -0.3 -0.3 -0.3 -0.3 -0.3
0 10 -20 10
Max 14 4 28 7 7
+50 90 +60 90 65
Unit [Volt] [Volt] VDC VDC VDC [oC] [%RH] [oC] [%RH] [oC]
Conditions Note 1 Note 1 Note 1 Note 1 Note 1 Note 2 Note 2 Note 2 Note 2 Note 3
Note 1: Duration:50 msec.
℃Note 2 : Maximum Wet-Bulb should be 39 and No condensation. ℃The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures ℃ ℃greater than 40 , the wet bulb temperature must not exceed 39 . ℃Note 3: Surface temperature is measured at 50 Dry condition
© Copyright AUO Optronics Corp. 2009 All Rights Reserved.
Page 5 / 37
3. Electrical Specification
T576DC01 V0 Product Specification Rev.0 2
The T576DC01 V0 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array and liquid crystal. The other is to power Back Light Unit.
3.1 Electrical Characteristics
3.1.1: DC Characteristics
Parameter
LCD Power Supply Input Voltage Power Supply Input Current Power Consumption Inrush Current
Input Differential Voltage
LVDS Differential Input High Threshold Vol.