Document
Model Name: T645HW04.1 SKD
Issue Date : 2013/6/14
(*)Preliminary Specifications ( )Final Specifications
Customer Signature
Date AUO
Approved By _________________________________
Approval By PM Director CP Wang
Note
Reviewed By RD Director Eugene CC Chen
Date
Reviewed By Project Leader Sun Wei Liang
Prepared By PM Fanfan Lee
Contents
No CONTENTS RECORD OF REVISIONS
1 GENERAL DESCRIPTION 2 ABSOLUTE MAXIMUM RATINGS 3 ELECTRICAL SPECIFICATION
3-1 ELECTRIACL CHARACTERISTICS 3-2 INTERFACE CONNECTIONS 3-3 SIGNAL TIMING SPECIFICATION 3-4 SIGNAL TIMING WAVEFORM 3-5 COLOR INPUT DATA REFERENCE 3-6 POWER SEQUENCE 4 OPTICAL SPECIFICATION 5 OPEN CELL DRAWING 6 RELIABILITY TEST ITEMS 7 PACKING 7-1 DEFINITION OF LABEL 7-2 PACKING METHODS 7-3 PALLET AND SHIPMENT INFORMATION 8 PRECAUTION 8-1 MOUNTING PRECAUTIONS 8-2 OPERATING PRECAUTIONS 8-3 ELECTROSTATIC DISCHARGE CONTROL 8-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE 8-5 STORAGE 8-6 HANDLING PRECAUTIONS FOR PROTECT FILM
Record of Revision
Version
Date
0.0 2013/06/14
Page First release
Description
1. General Description
This specification applies to the 65.0 inch Color TFT-LCD Module T645HW04 V1. This LCD module has a TFT active matrix type liquid crystal panel 1,920x1,080 pixels, and diagonal size of 65.0 inch. This module supports 1,920x1,080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot.
The T645HW04 V1 has been designed to apply the 8-bit 2 channel LVDS interface method. It is intended to support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very important.
* General Information
Items
Specification
Unit
Active Screen Size
65.00
inch
Display Area
1428.48 (H) x 803.52 (V)
mm
Outline Dimension
1461.98 (H) x 839.24 (V)
mm
Driver Element
a-Si TFT active matrix
Display Colors
8 bit, 1073.7M
Colors
Number of Pixels
1,920x1,080
Pixel
Pixel Pitch
0.744 (H) x 0.744 (W)
mm
Pixel Arrangement
RGB vertical stripe
Display Operation Mode
Normally Black
Surface Treatment
SC
Rotate Function
Unachievable
Note 1
Note 1: Rotate Function refers to LCD display could be able to rotate.
Note
2. Absolute Maximum Ratings
The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit
Item
Symbol
Min
Max
Unit Conditions
Logic/LCD Drive Voltage Input Voltage of Signal Operating Temperature
VDD Vin TOP
-0.3 -0.3
0
14 [Volt] 4 [Volt] +50 [oC]
Note 1 Note 1 Note 2
Operating Humidity Storage Temperature
HOP TST
10 -20
90 [%RH] +60 [oC]
Note 2 Note 2
Storage Humidity Panel Surface Temperature
HST PST
10
90 [%RH] 65 [oC]
Note 2 Note 3
Note 1: Duration:50 msec.
℃Note 2 : Maximum Wet-Bulb should be 39 and No condensation. ℃The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures ℃ ℃greater than 40 , the wet bulb temperature must not exceed 39 . ℃Note 3: Surface temperature is measured at 50 Dry condition
3. Electrical Specification
The T645HW04 V1 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array and liquid crystal. The other is to power back light unit.
3.1 Electrical Characteristics
3.1.1: DC Characteristics
Parameter
LCD Power Supply Input Voltage Power Supply Input Current Inrush Current Permissible Ripple of Power Supply Input Voltage
Input Differential Voltage
Symbol Min.
Value Typ.
Max
Unit Note
VDD IDD IRUSH VRP
∣ ∣VID
10.8 ---200
12 0.61
--400
13.2 0.75
VDC A
7.5 A
VDD * 5% mVpk-pk
600 mVDC
1 2 3 4
LVDS Interface
Differential Input High Threshold Voltage Differential Input Low Threshold Voltage
VTH VTL
+100 -300
---
+300 -100
mVDC mVDC
4 4
Input Common Mode Voltage
VICM
1.1 1.25
1.4
VDC 4
CMOS
Input High Threshold Voltage
VIH (High)
2.7
--
3.3
VDC 5
Interface Input Low Threshold Voltage
VIL (Low)
0
--
0.6
VDC 5
LED lightbar and LED Backlight structure are designed by customers, AUO can not guarantee life time and
backlight power consumption.
3.1.2: AC Characteristics
Parameter
LVDS Interface
I2C Interface
Input Channel Pair Skew Margin
Receiver Clock : Spread Spectrum Modulation range Receiver Clock : Spread Spectrum Modulation frequency Receiver Data Input Margin
Fclk = 85 MHz Fclk = 65 MHz SCL clock frequency I2C clock high level I2C clock low level I2C data setup time I2C data hold time SDA and SCL rise time SDA and SCL fall time
Symbol tSKEW (CP) Fclk_ss
Fss
Min.
-500 Fclk -3% 30
Value Typ.
Max
-- +500 Fclk
-+3%
-- 200
Unit Note
ps MHz KHz
6 7 7
tRMG
-0.4
--
0.4
ns 8
-0.5 --
0.5
FSCL 0 -TSCHi 0.6 --
400 KHZ -- us
TSCLo
1.2
--
--
us
TSDS 100 -- -- ns
TSDH 0 -- 900 ns
TR -- -- 1000 ns TF -- -- 300 ns
3.1.3: Driver Characteristics
Item
Symbol
Min
Max Unit
Driver Surface Temperature
DST
℃100 .