Document
T645HW05 V0 Product Specification Rev. 1.0
Model Name: T645HW05 V0
Issue Date : 2011/05/19 ( )Preliminary Specifications (*)Final Specifications
© Copyright AUO Optronics Corp. 2010 All Rights Reserved.
Page 1 / 33
Contents
T645HW05 V0 Product Specification Rev. 1.0
No CONTENTS RECORD OF REVISIONS
1 GENERAL DESCRIPTION 2 ABSOLUTE MAXIMUM RATINGS 3 ELECTRICAL SPECIFICATION
3-1 ELECTRIACL CHARACTERISTICS 3-2 INTERFACE CONNECTIONS 3-3 SIGNAL TIMING SPECIFICATION 3-4 SIGNAL TIMING WAVEFORM 3-5 COLOR INPUT DATA REFERENCE 3-6 POWER SEQUENCE 3-7 BACKLIGHT SPECIFICATION 4 OPTICAL SPECIFICATION 5 MECHANICAL CHARACTERISTICS 6 RELIABILITY TEST ITEMS 7 INTERNATIONAL STANDARD 7-1 SAFETY 7-2 EMC 8 PACKING 8-1 DEFINITION OF LABEL 8-2 PACKING METHODS 8-3 PALLET AND SHIPMENT INFORMATION 9 PRECAUTION 9-1 MOUNTING PRECAUTIONS 9-2 OPERATING PRECAUTIONS 9-3 ELECTROSTATIC DISCHARGE CONTROL 9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE 9-5 STORAGE 9-6 HANDLING PRECAUTIONS FOR PROTECT FILM
© Copyright AUO Optronics Corp. 2010 All Rights Reserved.
Page 2 / 33
Record of Revision
T645HW05 V0 Product Specification Rev. 1.0
Version
Date
1.0 2010/11/19
1.1 2011/5/19
Page
Description
First release
Update power consumption.
© Copyright AUO Optronics Corp. 2010 All Rights Reserved.
Page 3 / 33
T645HW05 V0 Product Specification Rev. 1.0
1. General Description
This specification applies to the 64.5 inch Color TFT-LCD Module T645HW05 V0. This LCD module has a TFT active matrix type liquid crystal panel 1920 x 1080 pixels, and diagonal size of 64.5 inch. This module supports 1920 x 1080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 10-bit gray scale signal for each dot.
The T645HW05 V0 has been designed to apply the 10-bit 4 channel LVDS interface method. It is intended to support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very important.
* General Information
Items Active Screen Size Display Area Outline Dimension Driver Element Display Colors Number of Pixels Pixel Pitch Pixel Arrangement Display Operation Mode Surface Treatment Best Viewing Distance
Specification 64.53
1428.48 (H) x 803.52 (V) 1508.0(H) x 878.0(V) x 12.8(D)
a-Si TFT active matrix 10 bit, 1.07B 1920 x 1080 0.744
RGB vertical stripe Normally Black HC, 3H 2.4
Unit inch mm mm
Colors Pixel mm
M
Note
© Copyright AUO Optronics Corp. 2010 All Rights Reserved.
Page 4 / 33
2. Absolute Maximum Ratings
T645HW05 V0 Product Specification Rev. 1.0
The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit
Item Logic/LCD Drive Voltage Input Voltage of Signal Operating Temperature Operating Humidity Storage Temperature Storage Humidity Panel Surface Temperature
Symbol VDD Vin TOP HOP TST HST PST
Min -0.3 -0.3
0 10 -20 10 -
Max 14 4
+50 90 +60 90 65
Unit [Volt] [Volt] [oC] [%RH] [oC] [%RH] [oC]
Conditions Note 1 Note 1 Note 2 Note 2 Note 2 Note 2 Note 3
Note 1: Duration:50 msec.
℃Note 2 : Maximum Wet-Bulb should be 39 and No condensation. ℃The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures ℃ ℃greater than 40 , the wet bulb temperature must not exceed 39 . ℃Note 3: Surface temperature is measured at 50 Dry condition
© Copyright AUO Optronics Corp. 2010 All Rights Reserved.
Page 5 / 33
3. Electrical Specification
T645HW05 V0 Product Specification Rev. 1.0
The T645HW05 V0 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array and liquid crystal. The second input for BLU is to power inverter.
3.1 Electrical Characteristics
Parameter
LCD
Power Supply Input Voltage
Power Supply Input Current
Power Consumption
Inrush Current
Input Differential Voltage
LVDS
Differential Input High Threshold Voltage
Interface Differential Input Low Threshold Voltage
Input Common Mode Voltage
CMOS Interface
Input High Threshold Voltage Input Low Threshold Voltage
Backlight Power Consumption Life Time
Value
Symbol
Min. Typ.
Max
VDD IDD PC IRUSH
∣ ∣VID
VTH VTL VICM VIH (High) VIL (Low) PBL
10.8 0.6 --200 +100 -300 1.10
2.7
0
-30,000
12.0 1.2 14.4 -400 --1.25
--
--
192
13.2 1.8 21.6 7 600 +300 -100 1.40
3.3
0.6
205 --
Unit
VDC A Watt A mVDC 4 4 VDC VDC
VDC Watt Hours
Note
1 2 2 3 4 4 4 4 --
----
Note : 1. The ripple voltage should be controlled under 10% of VCC
℃2. VDD = 12.0V, Fv = 120Hz, FCLK = 82MHz , 25 , Test Pattern : White Pattern
>> refer to “Section:3.3 Signal Timing Specification, Typical timing” 3. Measurement condition : Rising time = 400us
90%
VDD
GND
10%
400µs
© Copyright AUO Optronics Corp. 2010 All Rights Reserved.
Page 6 / 33
4. VICM = 1.25V
LVDS V IC M
LVDS +
T645HW05 V0 Product Specification Rev. 1.0
V TH V TL
|V ID|
GND
|V ID|
0V
|V ID|
3.2 AC Electrical Characteristics
Parameter
Input Channel .