DatasheetsPDF.com

T645HW05-V0 Dataheets PDF



Part Number T645HW05-V0
Manufacturers AUO
Logo AUO
Description TFT LCD Module
Datasheet T645HW05-V0 DatasheetT645HW05-V0 Datasheet (PDF)

T645HW05 V0 Product Specification Rev. 1.0 Model Name: T645HW05 V0 Issue Date : 2011/05/19 ( )Preliminary Specifications (*)Final Specifications © Copyright AUO Optronics Corp. 2010 All Rights Reserved. Page 1 / 33 Contents T645HW05 V0 Product Specification Rev. 1.0 No CONTENTS RECORD OF REVISIONS 1 GENERAL DESCRIPTION 2 ABSOLUTE MAXIMUM RATINGS 3 ELECTRICAL SPECIFICATION 3-1 ELECTRIACL CHARACTERISTICS 3-2 INTERFACE CONNECTIONS 3-3 SIGNAL TIMING SPECIFICATION 3-4 SIGNAL TIMING WAVEFORM 3-5 .

  T645HW05-V0   T645HW05-V0


Document
T645HW05 V0 Product Specification Rev. 1.0 Model Name: T645HW05 V0 Issue Date : 2011/05/19 ( )Preliminary Specifications (*)Final Specifications © Copyright AUO Optronics Corp. 2010 All Rights Reserved. Page 1 / 33 Contents T645HW05 V0 Product Specification Rev. 1.0 No CONTENTS RECORD OF REVISIONS 1 GENERAL DESCRIPTION 2 ABSOLUTE MAXIMUM RATINGS 3 ELECTRICAL SPECIFICATION 3-1 ELECTRIACL CHARACTERISTICS 3-2 INTERFACE CONNECTIONS 3-3 SIGNAL TIMING SPECIFICATION 3-4 SIGNAL TIMING WAVEFORM 3-5 COLOR INPUT DATA REFERENCE 3-6 POWER SEQUENCE 3-7 BACKLIGHT SPECIFICATION 4 OPTICAL SPECIFICATION 5 MECHANICAL CHARACTERISTICS 6 RELIABILITY TEST ITEMS 7 INTERNATIONAL STANDARD 7-1 SAFETY 7-2 EMC 8 PACKING 8-1 DEFINITION OF LABEL 8-2 PACKING METHODS 8-3 PALLET AND SHIPMENT INFORMATION 9 PRECAUTION 9-1 MOUNTING PRECAUTIONS 9-2 OPERATING PRECAUTIONS 9-3 ELECTROSTATIC DISCHARGE CONTROL 9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE 9-5 STORAGE 9-6 HANDLING PRECAUTIONS FOR PROTECT FILM © Copyright AUO Optronics Corp. 2010 All Rights Reserved. Page 2 / 33 Record of Revision T645HW05 V0 Product Specification Rev. 1.0 Version Date 1.0 2010/11/19 1.1 2011/5/19 Page Description First release Update power consumption. © Copyright AUO Optronics Corp. 2010 All Rights Reserved. Page 3 / 33 T645HW05 V0 Product Specification Rev. 1.0 1. General Description This specification applies to the 64.5 inch Color TFT-LCD Module T645HW05 V0. This LCD module has a TFT active matrix type liquid crystal panel 1920 x 1080 pixels, and diagonal size of 64.5 inch. This module supports 1920 x 1080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 10-bit gray scale signal for each dot. The T645HW05 V0 has been designed to apply the 10-bit 4 channel LVDS interface method. It is intended to support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very important. * General Information Items Active Screen Size Display Area Outline Dimension Driver Element Display Colors Number of Pixels Pixel Pitch Pixel Arrangement Display Operation Mode Surface Treatment Best Viewing Distance Specification 64.53 1428.48 (H) x 803.52 (V) 1508.0(H) x 878.0(V) x 12.8(D) a-Si TFT active matrix 10 bit, 1.07B 1920 x 1080 0.744 RGB vertical stripe Normally Black HC, 3H 2.4 Unit inch mm mm Colors Pixel mm M Note © Copyright AUO Optronics Corp. 2010 All Rights Reserved. Page 4 / 33 2. Absolute Maximum Ratings T645HW05 V0 Product Specification Rev. 1.0 The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit Item Logic/LCD Drive Voltage Input Voltage of Signal Operating Temperature Operating Humidity Storage Temperature Storage Humidity Panel Surface Temperature Symbol VDD Vin TOP HOP TST HST PST Min -0.3 -0.3 0 10 -20 10 - Max 14 4 +50 90 +60 90 65 Unit [Volt] [Volt] [oC] [%RH] [oC] [%RH] [oC] Conditions Note 1 Note 1 Note 2 Note 2 Note 2 Note 2 Note 3 Note 1: Duration:50 msec. ℃Note 2 : Maximum Wet-Bulb should be 39 and No condensation. ℃The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures ℃ ℃greater than 40 , the wet bulb temperature must not exceed 39 . ℃Note 3: Surface temperature is measured at 50 Dry condition © Copyright AUO Optronics Corp. 2010 All Rights Reserved. Page 5 / 33 3. Electrical Specification T645HW05 V0 Product Specification Rev. 1.0 The T645HW05 V0 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array and liquid crystal. The second input for BLU is to power inverter. 3.1 Electrical Characteristics Parameter LCD Power Supply Input Voltage Power Supply Input Current Power Consumption Inrush Current Input Differential Voltage LVDS Differential Input High Threshold Voltage Interface Differential Input Low Threshold Voltage Input Common Mode Voltage CMOS Interface Input High Threshold Voltage Input Low Threshold Voltage Backlight Power Consumption Life Time Value Symbol Min. Typ. Max VDD IDD PC IRUSH ∣ ∣VID VTH VTL VICM VIH (High) VIL (Low) PBL 10.8 0.6 --200 +100 -300 1.10 2.7 0 -30,000 12.0 1.2 14.4 -400 --1.25 -- -- 192 13.2 1.8 21.6 7 600 +300 -100 1.40 3.3 0.6 205 -- Unit VDC A Watt A mVDC 4 4 VDC VDC VDC Watt Hours Note 1 2 2 3 4 4 4 4 -- ---- Note : 1. The ripple voltage should be controlled under 10% of VCC ℃2. VDD = 12.0V, Fv = 120Hz, FCLK = 82MHz , 25 , Test Pattern : White Pattern >> refer to “Section:3.3 Signal Timing Specification, Typical timing” 3. Measurement condition : Rising time = 400us 90% VDD GND 10% 400µs © Copyright AUO Optronics Corp. 2010 All Rights Reserved. Page 6 / 33 4. VICM = 1.25V LVDS V IC M LVDS + T645HW05 V0 Product Specification Rev. 1.0 V TH V TL |V ID| GND |V ID| 0V |V ID| 3.2 AC Electrical Characteristics Parameter Input Channel .


T645HW04.1-SKD T645HW05-V0 T650HVD01.0


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)