Document
ALUMINUM ELECTROLYTIC CAPACITORS
MW 5mmL, For General Audio Equipment series
Acoustic series, with 5mm height. Compliant to the RoHS directive (2002/95/EC).
SW
Smaller
Specifications
MW
Item Performance Characteristics
Category Temperature Range
– 40 to +85°C
Rated Voltage Range
4 to 50V
Rated Capacitance Range 0.1 to 470µF
Capacitance Tolerance Leakage Current
Tangent of loss angle (tan δ)
± 20% at 120Hz, 20°C
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater.
Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage (V) tan δ (MAX.)
4 0.35
6.3 0.24
10 0.20
16 0.16
25 0.14
35 0.12
50 0.10
Measurement frequency : 120Hz
Rated voltage (V)
4 6.3 10 16 25 35 50
Stability at Low Temperature
Impedance ratio
Z– 25°C / Z+20°C
7
4
3
2
2
22
ZT / Z20 (MAX.)
Z– 40°C / Z+20°C
15
8
6
4
4
33
Endurance
Shelf Life Marking
The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with black color letter on gold sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
Type numbering system (Example : 25V 10µF)
1 2 3 4 5 6 7 8 9 10 11
U MW 1 E 1 0 0 M D D
φD+0.5 MAX. P±0.5
L+1MAX.
15MIN
4MIN
(mm) φD 4 5 6.3 8 P 1.5 2.0 2.5 2.5 φd 0.45 0.45 0.45 0.45
Dimensions
Cap.(µF)
0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470
code
V
0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471
4 0G
4× 5 4× 5 5× 5 6.3 × 5 8× 5 8× 5
28 33 56 96 145 185
6.3 0J
4× 5 5× 5 5× 5 6.3 × 5 8× 5 8× 5
28 37 45 70 110 170
10 1A
5× 5 5× 5 6.3 × 5 8× 5 8× 5
33 41 52 80 135
Frequency coefficient of rated ripple current
Frequency
50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more
Coefficient
0.70 1.00 1.17 1.36
1.50
Configuration
φD
Pb-free leadwire Pb-free PET sleeve
4 to 8
DD
Configuration Capacitance tolerance (±20%) Rated capacitance (10µF)
Rated voltage (25V) Series name Type
16 1C
4× 5 5× 5 6.3 × 5 6.3 × 5 8× 5
23 37 49 58 92
25 1E
4× 5 5× 5 6.3 × 5 6.3 × 5 8× 5 8× 5
16 27 42 52 70 110
35 1V
4× 5 4× 5 5× 5 6.3 × 5 8× 5 8× 5
15 18 29 46 62 80
50
1H 4× 5 4× 5 4× 5 4× 5 4× 5 4× 5 4× 5 5× 5 6.3 × 5 8× 5 8× 5
1.0 2.0 2.8 4.0 8.4 13 17 20 33 52 71
Case size φ D × L Rated (mm) ripple
Rated ripple current(mArms) at 85°C 120Hz
Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.
CAT.8100Z
.