Document
ALUMINUM ELECTROLYTIC CAPACITORS
PT Miniature Sized, High Ripple Current, Long Life series
High ripple current. Suited for ballast application. Compliant to the RoHS directive (2002/95/EC).
PB
Smaller
PT
Smaller
Specifications
PZ
Item
Performance Characteristics
Category Temperature Range
– 25 to +105°C
Rated Voltage Range
200 to 450V
Rated Capacitance Range 15 to 820µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
After 2 minutes' application of rated voltage, leakage current is not more than 0.06CV+10 (µA)
Tangent of loss angle (tan δ)
Rated voltage (V) tan δ (MAX.)
Measurement frequency : 120Hz, Temperature : 20°C 200 220 250 400 420 450 0.12 0.12 0.12 0.15 0.20 0.20
Stability at Low Temperature
Rated voltage (V)
Impedance ratio ZT / Z20 (MAX.)
Z– 25°C / Z+20°C
Measurement frequency : 120Hz 200 220 250 400 420 450
333888
Endurance
Shelf Life Marking
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 5000 hours at 105°C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on dark brown sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
φD+ MAX. P±0.5
Pressure relief vent
L + MAX.
15 MIN
4 MIN
(mm) φD 10 12.5 16 18 20 22 25 P 5.0 5.0 7.5 7.5 10.0 10.0 12.5 φd 0.6 0.6 0.8 0.8 1.0 1.0 1.0
0.5 0.5 0.5 0.5 0.5 1.0 1.0 In case L > 25 for the φ12.5 dia. unit, lead dia. φ d = 0.8mm.
(φD < 20) : 1 .5 (φD 20) : 2 .0
• Please refer to page 20 about the end seal configulation.
Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
Type numbering system (Example : 250V 220µF)
1 2 3 4 5 6 7 8 9 10 11 12
U PT 2 E 2 2 1 M HD T
Size code Configuration Capacitance tolerance (± 20%) Rated capacitance (220µF) Rated voltage (250V)
Series name Type
Configuration
φD
Pb-free leadwire Pb-free PET sleeve
10 PD
12.5 to 18
HD
20 to 25
RD
CAT.8100Z
ALUMINUM ELECTROLYTIC CAPACITORS
PT series
Dimensions
V
Cap 15 18 22 27 33 39 47 56
Code 150 180 220 270 330 390 470 560
68 680
200 220 250 2D 2P 2E
10 × 31.5 0.27 10 × 31.5 0.29 12.5 × 25 0.31 10 × 31.5 0.35 12.5 × 25 0.34 12.5 × 31.5 0.36
82 820 12.5 × 25 0.41 12.5 × 31.5 0.39 12.5 × 31.5 0.40
100 101 12.5 × 31.5 0.48 12.5 × 31.5 0.43 12.5 × 35.5 0.46
120 121 12.5 × 31.5 0.53 12.5 × 35.5 0.49 12.5 × 40 0.53
150 151 12.5 × 35.5 0.62 12.5 × 40 0.58 16 × 31.5 0.62
180 181 12.5 × 40 0.70 16 × 31.5 0.67 16 × 35.5 0.72 18 × 31.5 0.72
16 × 31.5 0.76
16 × 35.5 0.77
16 × 40
0.83
220 221
18 × 31.5 0.81
18 × 31.5 0.77
18 × 35.5 0.83
270 271 16 × 35.5 0.88 16 × 40 0.88 18 × 40 0.95
18 × 31.5 0.87
18 × 35.5 0.88
330 331 18 × 35.5 1.01 18 × 40 1.01 22 × 40 1.05
390 391 18 × 40 1.13 22 × 40 1.15
470 471 22 × 40 1.20
22 × 50 25 × 40
1.45 1.45
560 561
22 × 50 1.50 25 × 50 1.55 25 × 40 1.50
680 681 22 × 50 1.50 25 × 50 1.60 25 × 40 1.50
820 821 25 × 50 1.60
Frequency coefficient of rated ripple current
Frequency 50Hz
120Hz
300Hz
1kHz
Coefficient
0.80
1.00
1.25
1.40
10kHz or more 1.60
400 2G
10 × 31.5 12.5 × 25 12.5 × 31.5 12.5 × 31.5 12.5 × 35.5 12.5 × 40
0.21 0.24 0.29 0.32 0.37 0.42
16 × 31.5 0.46
16 × 31.5 0.50
16 × 35.5 18 × 31.5 16 × 40 18 × 35.5
0.58 0.58 0.66 0.67
18 × 40 0.77
22 × 40 0.85
22 × 50 25 × 40 25 × 50
1.30 1.30 1.40
420 W6
10 × 31.5 12.5 × 25 12.5 × 31.5 12.5 × 31.5 12.5 × 35.5 12.5 × 40
16 × 31.5 16 × 35.5 18 × 31.5 16 × 40 18 × 31.5
0.17 0.20 0.24 0.27 0.31 0.36 0.43 0.51 0.51 0.57 0.57
450
2W
10 × 31.5 12.5 × 25 12.5 × 31.5 12.5 × 31.5 12.5 × 35.5 12.5 × 40
16 × 31.5 16 × 35.5 16 × 40 18 × 31.5
0.15 0.18 0.22 0.25 0.28 0.32 0.38 0.44 0.49 0.48
18 × 35.5 0.55
18 × 35.5 0.61
18 × 40
0.65
18 × 40 0.66 22 × 40 0.77
22 × 40 0.80 22 × 50 0.92 25 × 40 0.92
22 × 50 0.95 25 × 50 1.10 25 × 40 0.95
25 × 50 1.20
Case size
φ D × L (mm)
: Rated ripple current (Arms) at 105°C 120Hz
: In this case, 6 will be put at 12th digit of type numbering system.
CAT.8100Z
.