DatasheetsPDF.com

UPT2W271MHD Dataheets PDF



Part Number UPT2W271MHD
Manufacturers Nichicon
Logo Nichicon
Description ALUMINUM ELECTROLYTIC CAPACITORS
Datasheet UPT2W271MHD DatasheetUPT2W271MHD Datasheet (PDF)

ALUMINUM ELECTROLYTIC CAPACITORS PT Miniature Sized, High Ripple Current, Long Life series High ripple current. Suited for ballast application. Compliant to the RoHS directive (2002/95/EC). PB Smaller PT Smaller Specifications PZ Item Performance Characteristics Category Temperature Range – 25 to +105°C Rated Voltage Range 200 to 450V Rated Capacitance Range 15 to 820µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage, leaka.

  UPT2W271MHD   UPT2W271MHD


Document
ALUMINUM ELECTROLYTIC CAPACITORS PT Miniature Sized, High Ripple Current, Long Life series High ripple current. Suited for ballast application. Compliant to the RoHS directive (2002/95/EC). PB Smaller PT Smaller Specifications PZ Item Performance Characteristics Category Temperature Range – 25 to +105°C Rated Voltage Range 200 to 450V Rated Capacitance Range 15 to 820µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.06CV+10 (µA) Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) Measurement frequency : 120Hz, Temperature : 20°C 200 220 250 400 420 450 0.12 0.12 0.12 0.15 0.20 0.20 Stability at Low Temperature Rated voltage (V) Impedance ratio ZT / Z20 (MAX.) Z– 25°C / Z+20°C Measurement frequency : 120Hz 200 220 250 400 420 450 333888 Endurance Shelf Life Marking The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 5000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Capacitance change tan δ Leakage current Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on dark brown sleeve. Radial Lead Type Sleeve (P.E.T.) φd φD+ MAX. P±0.5 Pressure relief vent L + MAX. 15 MIN 4 MIN (mm) φD 10 12.5 16 18 20 22 25 P 5.0 5.0 7.5 7.5 10.0 10.0 12.5 φd 0.6 0.6 0.8 0.8 1.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5 1.0 1.0 In case L > 25 for the φ12.5 dia. unit, lead dia. φ d = 0.8mm. (φD < 20) : 1 .5 (φD 20) : 2 .0 • Please refer to page 20 about the end seal configulation. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. Type numbering system (Example : 250V 220µF) 1 2 3 4 5 6 7 8 9 10 11 12 U PT 2 E 2 2 1 M HD T Size code Configuration Capacitance tolerance (± 20%) Rated capacitance (220µF) Rated voltage (250V) Series name Type Configuration φD Pb-free leadwire Pb-free PET sleeve 10 PD 12.5 to 18 HD 20 to 25 RD CAT.8100Z ALUMINUM ELECTROLYTIC CAPACITORS PT series Dimensions V Cap 15 18 22 27 33 39 47 56 Code 150 180 220 270 330 390 470 560 68 680 200 220 250 2D 2P 2E 10 × 31.5 0.27 10 × 31.5 0.29 12.5 × 25 0.31 10 × 31.5 0.35 12.5 × 25 0.34 12.5 × 31.5 0.36 82 820 12.5 × 25 0.41 12.5 × 31.5 0.39 12.5 × 31.5 0.40 100 101 12.5 × 31.5 0.48 12.5 × 31.5 0.43 12.5 × 35.5 0.46 120 121 12.5 × 31.5 0.53 12.5 × 35.5 0.49 12.5 × 40 0.53 150 151 12.5 × 35.5 0.62 12.5 × 40 0.58 16 × 31.5 0.62 180 181 12.5 × 40 0.70 16 × 31.5 0.67 16 × 35.5 0.72 18 × 31.5 0.72 16 × 31.5 0.76 16 × 35.5 0.77 16 × 40 0.83 220 221 18 × 31.5 0.81 18 × 31.5 0.77 18 × 35.5 0.83 270 271 16 × 35.5 0.88 16 × 40 0.88 18 × 40 0.95 18 × 31.5 0.87 18 × 35.5 0.88 330 331 18 × 35.5 1.01 18 × 40 1.01 22 × 40 1.05 390 391 18 × 40 1.13 22 × 40 1.15 470 471 22 × 40 1.20 22 × 50 25 × 40 1.45 1.45 560 561 22 × 50 1.50 25 × 50 1.55 25 × 40 1.50 680 681 22 × 50 1.50 25 × 50 1.60 25 × 40 1.50 820 821 25 × 50 1.60 Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz Coefficient 0.80 1.00 1.25 1.40 10kHz or more 1.60 400 2G 10 × 31.5 12.5 × 25 12.5 × 31.5 12.5 × 31.5 12.5 × 35.5 12.5 × 40 0.21 0.24 0.29 0.32 0.37 0.42 16 × 31.5 0.46 16 × 31.5 0.50 16 × 35.5 18 × 31.5 16 × 40 18 × 35.5 0.58 0.58 0.66 0.67 18 × 40 0.77 22 × 40 0.85 22 × 50 25 × 40 25 × 50 1.30 1.30 1.40 420 W6 10 × 31.5 12.5 × 25 12.5 × 31.5 12.5 × 31.5 12.5 × 35.5 12.5 × 40 16 × 31.5 16 × 35.5 18 × 31.5 16 × 40 18 × 31.5 0.17 0.20 0.24 0.27 0.31 0.36 0.43 0.51 0.51 0.57 0.57 450 2W 10 × 31.5 12.5 × 25 12.5 × 31.5 12.5 × 31.5 12.5 × 35.5 12.5 × 40 16 × 31.5 16 × 35.5 16 × 40 18 × 31.5 0.15 0.18 0.22 0.25 0.28 0.32 0.38 0.44 0.49 0.48 18 × 35.5 0.55 18 × 35.5 0.61 18 × 40 0.65 18 × 40 0.66 22 × 40 0.77 22 × 40 0.80 22 × 50 0.92 25 × 40 0.92 22 × 50 0.95 25 × 50 1.10 25 × 40 0.95 25 × 50 1.20 Case size φ D × L (mm) : Rated ripple current (Arms) at 105°C 120Hz : In this case, 6 will be put at 12th digit of type numbering system. CAT.8100Z .


UPT2W270MHD UPT2W271MHD UPT2W271MPD


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)