www.vishay.com
ERC (Military RNC/RNR)
Vishay Dale
Metal Film Resistors, Military/Established Reliability, MIL-PRF-55182 Qualified, Precision, Type RNC, Characteristics
J, H, K
FEATURES
• Meets requirements of MIL-PRF-55182 • Very low noise (- 40 dB) • Verified failure rate (contact factory for current level) • 100 % stabilization and screening tests. Group A testing,
if desired, to customer requirements • Controlled temperature coefficient • Epoxy coating provides superior moisture protection • Standard lead on RNC product is solderable and weldable • Traceability of materials and processing • Monthly acceptance testing • Vishay Dale has complete capability to develop specific
reliability programs designed to customer requirements • Extensive stocking program at distributors and factory on
RNC50, RNC55, RNC60 and RNC65 • For MIL-PRF-55182 characteristics E and C product, see
Vishay Angstrohm’s HDN (Military RNR/RNN) datasheet (www.vishay.com/doc?66001)
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL MODEL
MIL-PRF-55182 STYLE
MIL SPEC. SHEET
POWER
RATING
P70 °C W
POWER
RATING
P125 °C W
TOLERANCE (4) ±%
MAXIMUM
WORKING VOLTAGE (2)
V
RESISTANCE RANGE
TEMPERATURE LIFE
COEFFICIENT FAILURE
± ppm/°C
RATE (1)
ERC50, ERC50..31 (3)
RNC50, RNR50 07
0.10
0.05
0.1, 0.5, 1
200
10 to 796K
100 (K), 50 (H), 25 (J)
M, P, R, S
ERC55, ERC55..65 (3)
RNC55, RNR55 01
0.125
0.10
0.1, 0.5, 1
200
10 to 2M
100 (K), 50 (H), 25 (J)
M, P, R, S
ERC55..200, ERC55..201 (3)
RNC60, RNR60
03
0.25 0.125
0.1, 0.5, 1
250
10 to 2M
100 (K), 50 (H), 25 (J)
M, P, R, S
2.01M to 3.01M 100 (K), 50 (H), 25 (J) M
ERC65, ERC65..65 (3)
RNC65, RNR65 05
0.50
0.25
0.1, 0.5, 1
300
10 to 3.01M
100 (K), 50 (H), 25 (J)
M, P, R
ERC70 ERC70..4 (3)
RNC70, RNR70 06 0.75 0.50
0.1, 0.5, 1
350
10 to 3.01M
100 (K), 50 (H), 25 (J)
M, P, R
Notes
(1) Consult factory for current QPL failure rates. (2) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (3) Hot solder dipped leads. (4) Tolerance of ± 0.1 % is not applicable to characteristics K.
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
Voltage Coefficient, max.
ppm/V
Dielectric Strength Insulations Resistance
VAC
Operating Temperature Range
°C
Terminal Strength
lb
Solderability
Weight
g
CONDITION 5/V when measured between 10 % and full rated voltage RNC50, RNC55 and RNC60 = 450; RNC65 and RNC70 = 900
1011 dry; 109 after moisture test - 65 to + 175
2 lb pull test on RNC50, RNC55, RNC60 and RNC65; 4.5 lb pull test on RNC70 Continuous satisfactory coverage when tested in accordance with MIL-STD-202, method 208
RNC50 = 0.11; RNC55 = 0.35; RNC60 = 0.35; RNC65 = 0.84; RNC70 = 1.60
Revision: 21-Sep-12
1 Document Number: 31025
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
ERC (Military RNC/RNR)
Vishay Dale
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: RNC55H2152FRR36 (preferred part numbering format) R N C 55 H 2 1 5 2 F R R 3 6
MIL STYLE
CHARACTERISTICS
RESISTANCE VALUE
TOLERANCE CODE
FAILURE RATE
RNC = Solderable/ J = ± 25 ppm 3 digit significant B = ± 0.1 % M = 1.0 %/1000 h
weldable
H = ± 50 ppm figure, followed D = ± 0.5 % P = 0.1 %/1000 h
RNR = Solderable K = ± 100 ppm
by a multiplier F = ± 1 % R = 0.01 %/1000 h
only
Use “R” for
S = 0.001%/1000h
(see Standard
values < 100 Ω
Electrical
10R0 = 10 Ω
Specifications table)
2152 = 21.5 kΩ 3014 = 3.01 MΩ
Historical Part Number example: RNC55H2152FR R36 (will continue to be accepted)
RNC55
H
2152
F
PACKAGING
B14 = Tin/lead, bulk BSL = Tin/lead, bulk, single lot date code
R36 = Tin/lead, T/R (full; 50, 55, 60)
R64 = Tin/lead, T/R (full; 65, 70) RE6 = Tin/lead, T/R (1000 pieces) RSL = Tin/lead, T/R, single lot date code
R
SPECIAL
Blank = Standard (Dash number) (Up to 3 digits) From 1 to 999 as applicable
4 = Hot solder dip (70’s) 31= Hot solder dip (50’s) 65 = Hot solder dip
(55’s, 65’s) 201= Hot solder dip (60’s)
R36
MIL STYLE
CHARACTERISTIC
RESISTANCE VALUE TOLERANCE CODE
FAILURE RATE
PACKAGING
Note • For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc?31544).
DIMENSIONS in inches (millimeters)
A E (1)
C (Max.)
B
D
Note (1) Lead length for product in bulk pack. For product supplied in Tape and Reel, the actual lead length would be based on the body size, tape
spacing and lead trim.
VISHAY DALE MODEL ERC50
ERC55
ERC55..200
ERC65
ERC70
MIL-PRF-55182 STYLE
RNC50, RNR50
RNC55, RNR55
RNC60, RNR60
RNC65, RNR65
RNC70, RNR70
A
0.150 ± 0.020 (3.81 ± 0.51) 0.250 + 0.031 - 0.046 (6.35 + 0.79 - 1.17) 0.280 ± 0.020 (7.11 ± 0.51) 0.562 ± 0.031 (14.27 ± 0.79) 0.562 ± 0.031 (14.27 ± 0.79)
B
0.070 ± 0.010 (1.78 ± 0.25) 0.094 ± 0.012 (2.39 ± 0.30) 0.097 ± 0.012 (2.46 ± 0.3.