Document
www.eicsemi.com
DL201 - DL207
PRV : 50 - 1000 Volts Io : 2.0 Amperes
FEATURES :
* High current capability * High surge current capability * High reliability * Low reverse current * Low forward voltage drop * Pb / RoHS Free
MECHANICAL DATA :
* Case : DO-15 Molded plastic * Epoxy : UL94V-0 rate flame retardant * Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.4 gram
SILICON RECTIFIER DIODES DO-15
0.142 (3.6) 0.102 (2.6)
0.034 (0.86) 0.028 (0.71)
1.00 (25.4) MIN.
0.300 (7.6) 0.230 (5.8)
1.00 (25.4) MIN.
Dimensions in inches and ( millimeters )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATING
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Current
0.375"(9.5mm) Lead Length Ta = 50 °C
Peak Forward Surge Current
8.3ms Single half sine wave Superimposed
on rated load (JEDEC Method)
Maximum Forward Voltage at IF = 2.0 Amps.
Maximum DC Reverse Current
Ta = 25 °C
at rated DC Blocking Voltage
Ta = 100 °C
Typical Thermal Resistance (Note2)
Junction Temperature Range
Storage Temperature Range
SYMBOL DL201 DL202 DL203 DL204 DL205 DL206 DL207
VRRM VRMS VDC
50 100 200 400 600 800 1000 35 70 140 280 420 560 700 50 100 200 400 600 800 1000
UNIT V V V
IF 2.0 A
IFSM
VF IR IR(H) RθJA TJ TSTG
75
1.0 5.0 50 20 - 65 to + 175 - 65 to + 175
A
V µA µA °C/W °C °C
Notes : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0VDC (2) Thermal resistance from Junction to Ambient at 0.375" (9.5mm) Lead Lengths, P.C. Board Mounted.
Page 1 of 2
Rev. 03 : February 28, 2014
www.eicsemi.com RATING AND CHARACTERISTIC CURVES (DL201 - DL207)
AVERAGE FORWARD OUTPUT CURRENT, AMPERES
FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT
2.0
1.6
1.2
0.8
0.4 RESISTIVE OR INDUCTIVE LOAD
0 0
25 50 75 100 125 150 175
AMBIENT TEMPERATURE, ( °C)
PEAK FORWARD SURGE CURRENT, AMPERES
FIG.2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
75 8.3 ms SINGLE HALF SINE WAVE Ta = 50 °C
60
45
30 15
0 1
2
4 6 10 20 40 60 100
NUMBER OF CYCLES AT 60Hz
REVERSE CURRENT, MICROAMPERES
FIG.3 - TYPICAL FORWARD CHARACTERISTICS
100
10
FIG.4 - TYPICAL REVERSE CHARACTERISTICS
10 TJ = 100 °C
1.0
1.0
Pulse Width = 300 µs 2% Duty Cycle
0.1 TJ = 25 °C
0.01 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4
FORWARD VOLTAGE, VOLTS
0.1 TJ = 25 °C
0.01 0
20 40
60 80 100 120 140
PERCENT OF RATED REVERSE VOLTAGE, (%)
FORWARD CURRENT, AMPERES
Page 2 of 2
Rev. 03 : February 28, 2014
.