LQSW6271MELB30

ALUMINUM ELECTROLYTIC CAPACITORS QS Snap-in Terminal type, 105°C High speed charge-discharge. series Suited for high frequency regenerative voltage for AC servomotor, general inverter. Suited for equipment used at valtage fluctuating area. Suited for rectifier circuit of voltage doubler Compliant to the RoHS directive (2002/95/EC). QS Hi speed chargedischarge GU Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) Stability at Low Temperature Endurance of chargedischarge behavior Endurance Shelf Life Marking Performance Characteristics – 25 to +105°C 350 to 450V 82 to 820µF ± 20% at 120Hz, 20°C 1 3 CV(µA) (After 5 minutes' application of rated voltage [C : Rated Capacitance(µF), V : Voltage ( V ) ] Rated voltage (V) tan δ (MAX.) 350 0.15 Measurement frequency : 120Hz, 400 0.15 420 0.15 Temperature : 20°C 450 0.20 Rated voltage (V) Impedance ratio ZT/Z20(MAX.) 350 to 450 Z – 25°C / Z+20°C 8 Measurement frequency : 120Hz After an application of charge-discharge voltage for 50million times (charge-discharge voltage difference(∆V) = rated voltage × 0.35, cycle 6Hz) capacitors shell meet the characteristics requirement listed at right. Capacitance change tan δ Leakage current Appearance Within ±20% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value There shell be found to remarkab...