AH3601
ULTRA-SENSITIVE BIPOLAR HALL-EFFECT SWITCHES
The Hall-effect switch is designed for magnetic actuation using a bi...
AH3601
ULTRA-SENSITIVE BIPOLAR HALL-EFFECT SWITCHES
The Hall-effect switch is designed for magnetic actuation using a bipolar magnetic field, i.e., a north-south alternating field, and they are designed to operate continuously over extended temperatures to +100°C, They combine extreme magnetic sensitivity with excellent stability over varying temperature and supply voltage. The high sensitivity permits their use with multi-pole ring magnets over relatively large distances.
Each device includes a voltage
regulator, quadratic Hal voltage generator, temperature stability circuit, signal amplifier, Schmitt trigger, and open-collector output on a single silicon chip. The on-board
regulator permits operation with supply voltages of 2.5 to 18 V. The switch output can sink up to 15 mA. With suitable output pull up, they can be used directly with bipolar or MOS logic circuits.
FEATURES
Wide Supply Voltage Range Fast Response Time Wide Frequency And Temperature Range Long Operating Life Small Size, Convenient Installing Output Compatible With Al Digital Logic families
ABSOLUTE MAXIMUM RATING
Parameter
Symbol
Supply Voltage
VCC
Magnetic Flux Density
B
Output OFF Voltage
Vce
Continuous Output Current Operating Temperature Range
IOL TA
Storage Temperature Range
TS
TYPICAL APPLICATIONS
Contactless Switch
. Position Control
Speed Measurement
. Revolution Detection
Isolation Measurement . Brushless DC Motor
Automotive Ignitor
Value 18 Unlimited 28 15 -25~100 -50~155
Un...