SiT8003 Programmable Oscillator Datasheet

SiT8003 Datasheet, PDF, Equivalent


Part Number

SiT8003

Description

Low Power Programmable Oscillator

Manufacture

Si Time

Total Page 4 Pages
Datasheet
Download SiT8003 Datasheet


SiT8003
SiT8003
Low Power Programmable Oscillator
1 - 110 MHz
Features, Benefits and Applications
• The world’s lowest power programmable oscillator with 3.2 mA typical active current
• 1-110 MHz frequency range
• High frequency stability of ±25 PPM, ±30 PPM, ±50 PPM, ±100 PPM
• Extremely fast resume time of 3.5 ms
• Programmable standby or output enable modes
• Available in four industry standard packages: 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, 7.0 x 5.0 mm
• Outstanding mechanical robustness for portable applications
• All-silicon device with outstanding reliability of 2 FIT (10x improvement over quartz-based devices),
enhancing system mean-time-to-failure (MTBF)
• Ultra short lead time
• Ideal for portable applications :portable media players, digital cameras, digital camcorders, portable
navigation device, handheld gaming, cell phone and other handheld applications.
• Ideal for high-speed serial protocols such as: USB 1.1, USB 2.0, SATA, SAS, Fiber Channel,
Firewire, Ethernet, PCI Express, etc
Specifications
Parameter
Output Frequency Range
Frequency Stability
Symbol
f
F_stab
Aging
Storage Temperature Range
Operating Temperature Range
Supply Voltage
Ag
T_use
Vdd
Current Consumption
Standby Current
Duty Cycle
Rise/Fall Time
Output Voltage High
Idd
I_std
DC
Tr, Tf
VOH
Min.
1
-25
-30
-50
-100
–1.0
-65
-20
-40
1.71
2.25
2.52
2.97
45
40
-
90%
Output Voltage Low
VOL
Output Load
Input Voltage High
Input Voltage Low
Startup Time
Resume Time
RMS Period Jitter
RMS Phase Jitter (random)
Ld
VIH
VIL
T_osc
T_resume
T_jitt
T_phj
70%
Typ.
1.8
2.5
2.8
3.3
3.2
3.7
0.4
1.2
2.4
50
50
1
1.3
0.6
0.8
Max.
110
+25
+30
+50
+100
1.0
+150
+70
+85
1.89
2.75
3.08
3.63
3.5
4.1
0.8
2.2
4.3
55
60
2
2.5
10%
15
30%
10
3.5
5.5
4.0
Unit
MHz
PPM
PPM
PPM
PPM
PPM
°C
°C
°C
V
V
V
V
mA
mA
µA
µA
µA
%
%
ns
ns
Vdd
Vdd
pF
Vdd
Vdd
ms
ms
ps
ps
ps
ps
Condition
Inclusive of: Initial stability, operating temperature, rated power,
supply voltage change, load change, shock and vibration.
Contact SiTime for ±25 PPM and ±30 PPM support for Indus-
trial temperature.
1st year at 25°C
Extended Commercial
Industrial
No load condition, f = 20 MHz, Vdd = 1.8 V
No load condition, f = 20 MHz, Vdd = 2.5 V, 2.8 V or 3.3 V
ST = GND, Vdd = 1.8 V, Output is Weakly Pulled Down
ST = GND, Vdd = 2.5 or 2.8 V, Output is Weakly Pulled Down
ST = GND, Vdd = 3.3 V, Output is Weakly Pulled Down
All Vdds. f <= 75 MHz
All Vdds. f > 75 MHz
20% - 80% Vdd=2.5V, 2.8V or 3.3V, 15pf load
20% - 80% Vdd=1.8V, 15pf load
IOH = -4 mA (Vdd = 3.3 V)
IOH = -3 mA (Vdd = 2.8 V and Vdd = 2.5 V)
IOH = -2 mA (Vdd = 1.8 V)
IOL = 4 mA (Vdd = 3.3 V)
IOL = 3 mA (Vdd = 2.8 V and Vdd = 2.5 V)
IOL = 2 mA (Vdd = 1.8 V)
At maximum frequency and supply voltage. Contact SiTime for
higher output load option
Pin 1, OE or ST
Pin 1, OE or ST
Measured from the time Vdd reaches its rated minimum value
Measured from the time ST pin crosses 50% threshold
f = 75 MHz, Vdd = 1.8 V
f = 75 MHz, Vdd = 2.5 V, 2.8 V or 3.3 V
f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz, VDD =
2.5V, 2.8V, or 3.3V
f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz,
VDD = 1.8V
SiTime Corporation
Rev. 1.41
990 Almanor Avenue
Sunnyvale, CA 94085
(408) 328-4400
www.sitime.com
Revised January 7, 2009

SiT8003
SiT8003
Low Power Programmable Oscillator
1 - 110 MHz
Specifications (cont.)
Absolute Maximum Ratings
Attempted operation outside the absolute maximum ratings of the part may cause permanent damage to the part. Actual performance of the IC is only guaranteed
within the operational specifications, not at absolute maximum ratings.
Absolute Maximum Table
Parameter
Storage Temperature
VDD
Electrostatic Discharge
Theta JA ( with copper plane on VDD and GND)
Theta JC (with PCB traces of 0.010 inch to all pins)
Soldering Temperature (follow standard Pb free soldering guidelines)
Number of Program Writes
Program Retention over -40 to 125 °C, Process, VDD (0 to 3.65V)
Min.
-65
-0.5
Max.
150
+3.65
6000
75
24
260
1
1,000+
Unit
°C
V
V
°C/W
°C/W
°C
NA
years
Environmental Compliance
Parameter
Mechanical Shock
Mechanical Vibration
Temperature Cycle
Solderability
Moisture Sensibility Level
Condition/Test Method
MIL-STD-883F, Method 2002
MIL-STD-883F, Method 2007
JESD22, Method A104
MIL-STD-883F, Method 2003
MSL1 @ 260°C
Rev. 1.41
Page 2 of 4
www.sitime.com


Features SiT8003 Low Power Programmable Oscillato r 1 - 110 MHz Features, Benefits and A pplications • The world’s lowest po wer programmable oscillator with 3.2 mA typical active current • 1-110 MHz f requency range • High frequency stabi lity of ±25 PPM, ±30 PPM, ±50 PPM, 100 PPM • Extremely fast resume time of 3.5 ms • Programmable standby or output enable modes • Available in fo ur industry standard packages: 2.5 x 2. 0, 3.2 x 2.5, 5.0 x 3.2, 7.0 x 5.0 mm Outstanding mechanical robustness fo r portable applications • All-silicon device with outstanding reliability of 2 FIT (10x improvement over quartz-bas ed devices), enhancing system mean-time -to-failure (MTBF) • Ultra short lead time • Ideal for portable applicatio ns :portable media players, digital cam eras, digital camcorders, portable navi gation device, handheld gaming, cell ph one and other handheld applications. Ideal for high-speed serial protocols such as: USB 1.1, USB 2.0, SATA, SAS, Fiber Channel, Firewire, Ethernet, PCI Express, etc .
Keywords SiT8003, datasheet, pdf, Si Time, Low, Power, Programmable, Oscillator, iT8003, T8003, 8003, SiT800, SiT80, SiT8, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)