Document
ALUMINUM ELECTROLYTIC CAPACITORS
SP 7mmL, Bi-Polarized series
Bi-polarized series with 7mm height. Extended capacitance range by an addition of φ8 product. Compliant to the RoHS directive (2002/95/EC).
SP
Bi-polarized SA
Specifications
Item
Performance Characteristics
Category Temperature Range
– 40 to +85˚C
Rated Voltage Range
6.3 to 50V
Rated Capacitance Range 0.1 to 220µF
Capacitance Tolerance
± 20% at 120Hz, 20˚C
Leakage Current Tangent of loss angle (tan δ)
After 2 minutes' application of rated voltage, leakage current is not more than 0.05CV or 10 (µA), whichever is greater.
Rated voltage (V) tan δ (MAX.)
6.3 0.24
10 0.20
Measurement frequency : 120Hz, Temperature : 20˚C
16 25 35 50
0.16
0.16
0.14
0.12
Measurement frequency : 120 Hz
Rated voltage (V)
6.3 10 16 25 35 50
Stability at Low Temperature Impedance ratio Z– 25˚C / Z+20˚C
4
3
2
2
2
2
ZT / Z20 (MAX.) Z– 40˚C / Z+20˚C
8
6
4
4
3
3
Endurance
Shelf Life Marking
The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C with the polarity inverted every 250 hours.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on black sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
Type numbering system (Example : 10V 33µF)
1 2 3 4 5 6 7 8 9 10 11
USP 1A 3 3 0 MDD
φD+0.5 MAX P±0.5
L+1MAX
15MIN
4MIN
(mm) φD 4 5 6.3 8 P 1.5 2.0 2.5 3.5 φd 0.45 0.45 0.45 0.5
Dimensions
Cap.(µF) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7
10 22 33 47 100 220
V Code
0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221
6.3 0J
0.5 × 7 6.3 × 7 0.8 × 7 0.8 × 7
42 58 95 140
10 1A
0.4 × 7 0.5 × 7 6.3 × 7 6.3 × 7 0.8 × 7
Frequency coefficient of rated ripple current
Frequency
50 Hz 120 Hz 300 Hz 1 kHz
Coefficient
0.70 1.00 1.17 1.36
16 1C
0.4 × 7 24 0.5 × 7 40 6.3 × 7 56 6.3 × 7 67 6.3 × 7 110 0.8 × 7
10 kHz or more 1.50
Configuration
φD
Pb-free leadwire Pb-free PET sleeve
4 to 8
DD
Configuration Capacitance tolerance (±20%)
Rated capacitance (33µF) Rated voltage (10V) Series name Type
25 35 50
1E 1V 1H
0.4 × 7
1.0
0.4 × 7
2.3
0.4 × 7
3.5
0.4 × 7
5.0
0.4 × 7
10
0.4 × 7
14
0.4 × 7
16
0.5 × 7
20
18
0.5 × 7
21
0.5 × 7
22
6.3 × 7
27
30
6.3 × 7
35
6.3 × 7
37
0.8 × 7
44
51
6.3 × 7
53
0.8 × 7
62
0.8 × 7
65
63 0.8 × 7 73 0.8 × 7 76
75 0.8 × 7 87
125 Case size Rated φ D × L (mm) ripple
Rated ripple current (mArms) at 85˚C 120Hz
Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.
CAT.8100Z
.