DatasheetsPDF.com

PCV1D680MCL1GS Dataheets PDF



Part Number PCV1D680MCL1GS
Manufacturers Nichicon
Logo Nichicon
Description ALUMINUM ELECTROLYTIC CAPACITORS
Datasheet PCV1D680MCL1GS DatasheetPCV1D680MCL1GS Datasheet (PDF)

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CV Chip Type, High Voltage / Long Life series High voltage (to 63V), Low ESR, High ripple current. Load life of 3000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (2002/95/EC). CV CFHigh Voltage Long Life Specifications Item Performance Characteristics Category Temperature Range – 55 to +105°C Rated Voltage Range 16 to 63V Rated Capacitance Range 5.6.

  PCV1D680MCL1GS   PCV1D680MCL1GS


Document
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CV Chip Type, High Voltage / Long Life series High voltage (to 63V), Low ESR, High ripple current. Load life of 3000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (2002/95/EC). CV CFHigh Voltage Long Life Specifications Item Performance Characteristics Category Temperature Range – 55 to +105°C Rated Voltage Range 16 to 63V Rated Capacitance Range 5.6 to 470µF Capacitance Tolerance ± 20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) Less than or equal to the specified value . After 2 minutes' application of rated voltage at 20°C Temperature Characteristics (Max.Impedance Ratio) Z+105°C / Z+20°C 1.25 Z– 55°C / Z+20°C 1.25 (100kHz) Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 3000 hours at 105°C. Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Damp Heat (Steady State) The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60°C, 90% RH. Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Resistance to Soldering Heat Marking After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at right, provided that it's temperature profile is measured at the capacitor top and the terminal. Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. The duration for over +230°C temperature at capacitor surface shall not exceed 60 seconds. In the case of peak temp, less than 250°C, reflow soldering shall be two times maximum. In the case of peak temp, less than 260°C, reflow soldering shall be once. Measurement for solder temperature profile shall be made at the capacitor top and the terminal. Navy blue print on the case top Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 10% of the initial capacitance value ( 3) 130% or less than the initial specified value 130% or less than the initial specified value Less than or equal to the initial specified value 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 3 Initial value : The value before test of examination of resistance to soldering. Dimensions Capacitance Lot No. Plastic platform 0.3 MAX. C±0.2 Positive 0.5 MAX. E A ± 0.2 B± 0.2 CV 82 V 012 φD + 0.5 MAX. Series Voltage (V:35V) L +0.1 - 0.4 Negative H Type numbering system (Example : 35V 82µF) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PCV 1 V 8 2 0 MC L 1 GS Taping code Size code Configuration Capacitance toleranc (±20%) Rated capacitance (82µF) Rated voltage (35V) Series name Type (mm) Size φ6.3 × 6L φ8 × 7L φ8 × 10L φ8 × 12L φ10 × 8L φ10 × 10L φ10×12.7L φD 6.3 8.0 8.0 8.0 10.0 10.0 10.0 L 5.9 6.9 9.9 11.9 7.9 9.9 12.6 A 7.3 9.0 9.0 9.0 11.0 11.0 11.0 B 6.6 8.3 8.3 8.3 10.3 10.3 10.3 Voltage C 6.6 8.3 8.3 8.3 10.3 10.3 10.3 E 2.1 3.2 3.2 3.2 4.6 4.6 4.6 V 16 20 25 35 50 63 H 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 Code C D E V H J Dimension table in next page. CAT.8100Z CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CVseries Standard Ratings Rated Voltage Surge Voltage Rated Capacitance (V)(code) (V) (µF) 56 100 16 (1C) 18.4 220 220 270 330 470 47 68 20 (1D) 23.0 150 150 220 270 330 33 56 25 (1E) 28.7 120 120 150 180 270 18 27 35 (1V) 40.2 56 68 82 100 150 8.2 15 50 (1H) 57.5 33 33 39 47 68 5.6 10 63 (1J) 72.4 22 22 27 33 47 Case Size φD × L (mm) 6.3 × 6 8×7 8 × 10 10 × 8 8 × 12 10 × 10 10 × 12.7 6.3 × 6 8×7 8 × 10 10 × 8 8 × 12 10 × 10 10 × 12.7 6.3 × 6 8 ×7 8 × 10 10 × 8 8 × 12 10 × 10 10 × 12.7 6.3 × 6 8 ×7 8 × 10 10 × 8 8 × 12 10 × 10 10 × 12.7 6.3 × 6 8 ×7 8 × 10 10 × 8 8 × 12 10 × 10 10 × 12.7 6.3 × 6 8 ×7 8 × 10 10 × 8 8 × 12 10 × 10 10 × 12.7 tan δ 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 Leakage Current ESR (mΩ) (µA) (at 1.


PCV1D470MCL1GS PCV1D680MCL1GS PCV1D151MCL6GS


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)