DatasheetsPDF.com

PLG1A122MDO1 Dataheets PDF



Part Number PLG1A122MDO1
Manufacturers Nichicon
Logo Nichicon
Description CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
Datasheet PLG1A122MDO1 DatasheetPLG1A122MDO1 Datasheet (PDF)

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LG Radial Lead Type, Higher Capacitance series Higher Capacitance, Low ESR, High ripple current. Load life of 2000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence Compliant to the RoHS directive (2002/95/EC). LG Higher Capacitance Specifications LF Item Performance Characteristics Category Temperature Range – 55 to +105°C Rated Voltage Range 2.5 to 16V Rated Capacitance Range 330 to 3900µF .

  PLG1A122MDO1   PLG1A122MDO1


Document
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LG Radial Lead Type, Higher Capacitance series Higher Capacitance, Low ESR, High ripple current. Load life of 2000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence Compliant to the RoHS directive (2002/95/EC). LG Higher Capacitance Specifications LF Item Performance Characteristics Category Temperature Range – 55 to +105°C Rated Voltage Range 2.5 to 16V Rated Capacitance Range 330 to 3900µF Capacitance Tolerance ± 20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) Less than or equal to the specified value. After 2 minutes' application of rated voltage at 20°C Temperature Characteristics (Max.Impedance Ratio) Z+105°C / Z+20°C 1.25 Z– 55°C / Z+20°C 1.25 (100kHz) Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 105°C. Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Damp Heat (Steady State) The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60°C, 90% RH. Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Resistance to Soldering Heat After soldering the capacitor under the soldering conditions prescribed here as preheat at 150 to 200°C for 60 to 180 seconds and peak temperature at 265°C for 10 seconds or less, the capacitor shall meet the specifications listed at right, provided that its temperature profile is measured at both of terminal ends facing the soldering side. Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 10% of the initial capacitance value ( 3) 130% or less than the initial specified value 130% or less than the initial specified value Less than or equal to the initial specified value Marking Navy blue print on the case top 1 ESR should be measured at both of the terminal ends closest to the capacitor body. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 3 Initial value : The value before test of examination of resistance to soldering. Dimensions Capacitance Resin coated Case Voltage(g:4V) Silvered lead Wire LG 1200 g 841 φD+0.5 MAX. P±0.5 Series Lot. No. L+0.5MAX. φd 15MIN 4MIN (mm) Size φ8 × 9L φ8 × 12L φ10 × 13L φD 8.0 8.0 10.0 L 8.5 11.5 12.5 P 3.5 3.5 5.0 φd 0.6 0.6 0.6 Voltage V Code 2.5 e Please refer to page 20 about the end seal configulation. 4 g 6.3 10 jA 16 C Type numbering system (Example : 4V 1200µF) 1 2 3 4 5 6 7 8 9 10 11 12 P LG 0G 1 2 2 MCO 1 Size code Configuration Capacitance toleranc (±20%) Rated capacitance (1200µF) Rated voltage (4V) Series name Type Dimension table in next page. CAT.8100Z CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LG series Standard Ratings Rated Voltage (V) Code Surge Voltage (V) Rated Capacitance (µF) 2.5 (0E) 2.8 4 (0G) 4.6 6.3 (0J) 7.2 10 (1A) 16 (1C) 11.5 18.4 1800 2200 2700 3900 1200 1800 2700 820 1200 1500 1800 560 820 1200 330 470 820 Case Size φD × L (mm) 8×9 8 × 12 10 × 13 10 × 13 8×9 8 × 12 10 × 13 8×9 8 × 12 10 × 13 10 × 13 8×9 8 × 12 10 × 13 8×9 8 × 12 10 × 13 tan δ 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 Leakage Current ESR (mΩ) Rated Ripple (µA) (at 100kHz 20°C) (mArms) Part Number 900 9 6000 PLG0E182MCO1 1100 8 6700 PLG0E222MDO1 1350 8 5560 PLG0E272MDO1 1950 8 7000 PLG0E392MDO1 960 9 5900 PLG0G122MCO1 1440 9 6500 PLG0G182MDO1 2160 8 6900 PLG0G272MDO1 1033 9 5700 PLG0J821MCO1 1512 9 6100 PLG0J122MDO1 1890 9 6300 PLG0J152MDO1 2268 8 6600 PLG0J182MDO1 1120 11 5100 PLG1A561MCO1 1640 10 5800 PLG1A821MDO1 2400 9 6200 PLG1A122MDO1 1056 13 4700 PLG1C331MCO1 1504 11 5400 PLG1C471MDO1 2624 11 5600 PLG1C821MDO1 Rated ripple current (mArms) at 105°C 100kHz Taping specifications are given in page 20, 21, 22. Please refer to page 3 for the minimum order quantity. CAT.8100Z .


PLG1A821MDO1 PLG1A122MDO1 PLG1C331MCO1


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)