Document
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
CS Chip Type, Long Life Assurance series
Load life of 5000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (2002/95/EC).
CS
Long Life CF
Specifications
Item
Performance Characteristics
Category Temperature Range – 55 to +105°C
Rated Voltage Range
4 to 16V
Rated Capacitance Range 22 to 560µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2) Less than or equal to the specified value . After 2 minutes' application of rated voltage at 20°C
Temperature Characteristics (Max.Impedance Ratio)
Z+105°C / Z+20°C 1.25 Z– 55°C / Z+20°C 1.25
(100kHz)
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 5000 hours at 105°C.
Capacitance change tan δ ESR ( 1) Leakage current ( 2)
Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value
Damp Heat (Steady State)
The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60°C, 90% RH.
Capacitance change tan δ ESR ( 1) Leakage current ( 2)
Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value
Resistance to Soldering Heat
Marking
After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at right, provided that it's temperature profile is measured at the capacitor top and the terminal. Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. The duration for over +230°C temperature at capacitor surface shall not exceed 60 seconds. In the case of peak temp, less than 250°C, reflow soldering shall be two times maximum. In the case of peak temp, less than 260°C, reflow soldering shall be once. Measurement for solder temperature profile shall be made at the capacitor top and the terminal.
Navy blue print on the case top
Capacitance change tan δ ESR ( 1) Leakage current ( 2)
Within ± 10% of the initial capacitance value ( 3) 130% or less than the initial specified value 130% or less than the initial specified value Less than or equal to the initial specified value
1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C. 3 Initial value : The value before test of examination of resistance to soldering.
Dimensions
Capacitance
Lot No.
Plastic platform 0.3 MAX.
C±0.2
Positive
0.5 MAX.
E A ± 0.2
B± 0.2
CS 220 j 941 φD + 0.5 MAX.
Series
Voltage ( j:6.3v)
L
+0.1 - 0.4
Negative H
(mm)
Size φ5 × 6L φ6.3 × 6L φ8 × 7L
φD 5.0 6.3 8.0
L 5.9 5.9 6.9
A 6.0 7.3 9.0
B 5.3 6.6 8.3
Voltage
C 5.3 6.6 8.3 E 1.6 2.1 3.2 H 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1
V Code
4 6.3 10 16 g j AC
Type numbering system (Example : 6.3V 220µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
PCS 0 J 2 2 1 MC L 1 GS
Taping code Size code
Configuration Capacitance toleranc (±20%) Rated capacitance (220µF)
Rated voltage (6.3V) Series name Type
Dimension table in next page.
CAT.8100Z
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
CSseries
Standard Ratings
Rated Voltage Surge Voltage Rated Capacitance
(V)(code)
(V)
(µF)
150
4 (0G)
4.6
330 330
560
47
100
6.3 7.2 (0J)
100 120 220
220
390
33
56
10 11.5 (1A)
68 120
150
270
22
39
16 18.4 (1C)
39 68
82
120
Case Size φD × L (mm)
5×6 6.3 × 6
8×7 8×7 5×6 5×6 6.3 × 6 6.3 × 6 6.3 × 6 8×7 8×7 5×6 6.3 × 6 5×6 6.3 × 6 8×7 8×7 5×6 5×6 6.3 × 6 6.3 × 6 8×7 8×7
tan δ
0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12
Leakage Current
ESR (mΩ)
(µA) (at 100kHz 20°C)
120 25
264 20
264 22
448 18
100 35
126 25
126 22
151 22
277 20
277 22
491 22
100 40
112 27
136 30
240 27
300 30
540 22
100 45
125 35
125 30
218 30
262 28
384 28
Rated Ripple (mArms) 2200 2800 3200 3600 1600 2400 2800 2800 2800 3200 3200 1300 2300 2100 2300 2600 3200 1100 2000 2200 2200 2800 2800
Part Number
PCS0G151MCL1GS PCS0G331MCL1GS PCS0G331MCL9GS PCS0G561MCL1GS PCS0J470MCL1GS PCS0J101MCL1GS PCS0J101MCL9GS PCS0J121MCL9GS PCS0J221MCL1GS PCS0J221MCL9GS PCS0J391MCL1GS PCS1A330MCL1GS PCS1A560MCL9GS PCS1A680MCL1GS PCS1A121MCL1GS PCS1A151MCL9GS PCS1A271MCL1GS PCS1C220MCL1GS PCS1C390MCL1GS PCS1C390MCL9GS PCS1C680MCL1GS .