EGP10A

EGP10A-EGP10G High Efficiency Rectifiers VOLTAGE RANGE: 50 --- 400 V CURRENT: 1.0 A Features Low cost Diffused junction Low leakage Low forward voltage High current capability Easily cleaned with alcohol,Isopropanol and similar solvents The plastic material carries U/L recognition 94V-0 Mechanical Data Case:JEDEC DO--41,molded plastic Polarity: Color band denotes cathode Weight: 0.012 ounces,0.34 grams Mounting position: Any DO - 41 Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%. EGP 10A Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forw ard rectified current 9.5mm lead length @TA=75 Peak forw ard surge current VRRM VRMS VDC IF(AV) 50 35 50 8.3ms single half-sine-w ave IFSM superimposed on rated load @TJ=125 Maximum instantaneous forw ard voltage @ 1.0 A VF Maximum reverse current @TA=25 at rated DC blocking voltage @TA=125 IR Maximum reverse recovery time (Note1) trr Typical junction capacitance (Note2) CJ Typical thermal resistance (Note3) RθJA Operating junction temperature range TJ Storage temperature range TSTG NOTE: 1. Measured with IF=0.5A, IR=1A, Irr=0.25A. 2. Measured at 1.0MHz and applied rev erse uoltage of 4.0V DC. 3.Thermal resistance f rom junction to ambient. EGP 10B 100 70 100 EGP 10C 150 1...