DatasheetsPDF.com

PCG0G391MCL1GS Dataheets PDF



Part Number PCG0G391MCL1GS
Manufacturers Nichicon
Logo Nichicon
Description CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
Datasheet PCG0G391MCL1GS DatasheetPCG0G391MCL1GS Datasheet (PDF)

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CG Chip Type, Higher Capacitance series Higher Capacitance, Low ESR, High ripple current. Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (2002/95/EC). CG Higher Capacitance Specifications CF Item Performance Characteristics Category Temperature Range – 55 to +105°C Rated Voltage Range 2.5 to 16V Rated Capacitance Range 47 to 3300µF .

  PCG0G391MCL1GS   PCG0G391MCL1GS


Document
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CG Chip Type, Higher Capacitance series Higher Capacitance, Low ESR, High ripple current. Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (2002/95/EC). CG Higher Capacitance Specifications CF Item Performance Characteristics Category Temperature Range – 55 to +105°C Rated Voltage Range 2.5 to 16V Rated Capacitance Range 47 to 3300µF Capacitance Tolerance ± 20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) Less than or equal to the specified value. After 2 minutes' application of rated voltage at 20°C Temperature Characteristics (Max.Impedance Ratio) Z+105°C / Z+20°C 1.25 Z– 55°C / Z+20°C 1.25 (100kHz) Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 105°C. Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Damp Heat (Steady State) The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60°C, 90% RH. Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Resistance to Soldering Heat Marking After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at right, provided that it's temperature profile is measured at the capacitor top and the terminal. Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. The duration for over +230°C temperature at capacitor surface shall not exceed 60 seconds. In the case of peak temp, less than 250°C, reflow soldering shall be two times maximum. In the case of peak temp, less than 260°C, reflow soldering shall be once. Measurement for solder temperature profile shall be made at the capacitor top and the terminal. Navy blue print on the case top Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 10% of the initial capacitance value ( 3) 130% or less than the initial specified value 130% or less than the initial specified value Less than or equal to the initial specified value 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 3 Initial value : The value before test of examination of resistance to soldering. Dimensions Capacitance Lot No. Plastic platform 0.3 MAX. C±0.2 Positive Type numbering system (Example : 6.3V 470µF) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PCG 0 J 4 7 1 MC L 1 GS 0.5 MAX. CG 470 j 841 φD + 0.5 MAX. Series Voltage ( j:6.3v) L +0.1 - 0.4 H (mm) Size φ5 × 6L φ6.3 × 6L φ8 × 7L φ10 × 8L φ10 × 10L φ10 × 12.7L φD 5.0 6.3 8.0 10.0 10.0 10.0 L 5.9 5.9 6.9 7.9 9.9 12.6 A 6.0 7.3 9.0 11.0 11.0 11.0 B 5.3 6.6 8.3 10.3 10.3 10.3 C 5.3 6.6 8.3 10.3 10.3 10.3 E 1.6 2.1 3.2 4.6 4.6 4.6 H 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 Negative B± 0.2 E A ± 0.2 Taping code Configuration Capacitance toleranc (±20%) Rated capacitance (470µF) Rated voltage (6.3V) Series name Type Voltage V 2.5 4 6.3 10 16 Code e g j AC Dimension table in next page. CAT.8100Z CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CG series Standard Ratings Rated Voltage Surge Voltage Rated Capacitance (V)(code) (V) (µF) 2.5 (0E) 2.8 4 (0G) 4.6 6.3 (0J) 7.2 10 (1A) 11.5 16 (1C) 18.4 220 470 560 820 1500 2700 3300 180 390 680 1200 2200 2700 150 270 330 470 1000 1800 2200 82 150 330 560 820 1000 47 82 150 270 470 680 Case Size φD × L (mm) 5×6 6.3 × 6 6.3 × 6 8×7 10 × 8 10 × 10 10 × 12.7 5×6 6.3 × 6 8×7 10 × 8 10 × 10 10 × 12.7 5×6 6.3 × 6 6.3 × 6 8×7 10 × 8 10 × 10 10 × 12.7 5×6 6.3 × 6 8×7 10 × 8 10 × 10 10 × 12.7 5×6 6.3 × 6 8×7 10 × 8 10 × 10 10 × 12.7 tan δ 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 Leakage Current ESR (mΩ) (µA) (at 100kHz 20°C) 110 30 235 20 280 20 410 20 750 17 1350 12 1650 10 144 32 312 22 544 21 960 17 1760 13 2160 11 189 33 340 23 416 23 592 22 1260 18 2268 14 2772 12 164 35 300 25 660 23 1120 20 1640 15 2000 13 150 40 262 30 4.


PCG0G181MCL1GS PCG0G391MCL1GS PCG0G681MCL1GS


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)