DatasheetsPDF.com

GP1A05 Dataheets PDF



Part Number GP1A05
Manufacturers Sharp Electrionic Components
Logo Sharp Electrionic Components
Description OPIC Photointerrupter with Connector
Datasheet GP1A05 DatasheetGP1A05 Datasheet (PDF)

GP1A05/GP1A22LC/GP1A23LC/GP1A25LC GP1A05/GP1A22LC/ GP1A23LC/GP1A25LC s Features 1. Uses 3-pin connector terminal 2. High sensing accuracy ( Slit width : 0.5mm ) 3. Wide gap between light emitter and detector ( 5mm ) OPIC Photointerrupter with Connector s Applications 1. Copiers, Printers 2. Facsimiles * “ OPIC ” ( Optical IC ) is a trademark of SHARP Corporation. An OPIC consists of a light-detecting element and signal-processing circuit integrated onto a single chip. s Outline Dimensions GP.

  GP1A05   GP1A05



Document
GP1A05/GP1A22LC/GP1A23LC/GP1A25LC GP1A05/GP1A22LC/ GP1A23LC/GP1A25LC s Features 1. Uses 3-pin connector terminal 2. High sensing accuracy ( Slit width : 0.5mm ) 3. Wide gap between light emitter and detector ( 5mm ) OPIC Photointerrupter with Connector s Applications 1. Copiers, Printers 2. Facsimiles * “ OPIC ” ( Optical IC ) is a trademark of SHARP Corporation. An OPIC consists of a light-detecting element and signal-processing circuit integrated onto a single chip. s Outline Dimensions GP1A05 2.0 3.5 11.0 ± 0.3 ( Unit : mm ) GP1A22LC ( Same as GP1A05 except connector ) 34.0 15.0 5.0 5.0 3.0 7.5 10.5 (10.4) Slit width 0.5 g 3 2 7.0 3.5 1.0MAXg 2 φ 3.0 ± 0.1Depth2.0 φ 4.2 ± 0.2 11.0 3 2 g1 1 1 V CC 2 GND 3 VO 1 1 V CC 2 GND 3 VO ( 9.2 ) 5.5 ± 1.0 (2.5) (2.5) * ( ) : Reference dimensions g 2 protrusion of connector from holder: MAX.1.0 g 1 JAPAN SOLDERLESS TERMINAL MSG. CO., LTD. made connector B3P-SHF-1AA Recommended connectors on the inserted side Housing : H3P-SHF-AA Terminal : SHF-001T-0.8SS etc. gg C0.5 φ 0 4.0+ - 0.1 (2.5) (2.5) 11.0± 0.1 12.0± 0.1 g JAPAN AMP made EI 3-pin connector 171825-3 * Unspecified tolerances shall be as follows ; Dimensions(d) Tolerance d < 4.0 ± 0.2 4.0 <= d < 16.0 ± 0.3 16 <= d ± 0.5 * ( ) : Reference dimensions Recommended connectors on the inserted side 172053-3 etc. gg GP1A23LC ( Same as GP1A05 except connector ) 11.0± 0.3 5.5 ± 1.0 3.5 GP1A25LC ( Same as GP1A05 except connector ) 11.0 ± 0.3 1 V CC 2 GND 3 VO g 2 3 g 1 (2.5) 3 2 1 (2.5) * ( ): Reference dimensions g JAPAN SOLDERLESS TERMINAL MSG. CO., LTD. made connector BS3P-SHF-1AA Recommended connectors on the inserted side Housing : (H3P-SHF-AA ) etc gg Terminal : (SHF-001T-0.8SS ) etc. 1 V CC 2 GND 3 VO * ( ) : Reference dimensions g MOLEX JAPAN CO., LTD. made connector 5267-03A Recommended connectors on the inserted side Housing : 5264-03 Terminal : 5263PBT (2.5) (5.9) (9.9) (2.5) gg Recommended connectors on the inserted side are show on the following 3rd page. “ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.” 5.5 ± 1.0 GP1A05/GP1A22LC/GP1A23LC/GP1A25LC Internal connection diagram ( Common to 4 models ) 1 Voltage regulator Amp. 2 1 V CC 2 GND 3 VO 3 s Absoulte Maximum Ratlngs Parameter Supply GP1A05 GP1A22LC / GP1A23LC / GP1A25LC voltage *1 Output voltage *2 Low level output current *3 Operating temperature *3 Storage GP1A05 / GP1A22LC / GP1A23LC temperaGP1A25LC ture *1 Collector-emitter voltage of output transistor *2 Collector current of output transistor *3 The connector should be plugged in/out at normal temperature. ( Ta = 25˚C ) Symbol V CC VO I OL T opr T stg Rating - 0.5 to + 10 - 0.5 to + 8 - 0.5 to + 28 50 - 20 to + 75 - 40 to + 85 -.


GP1601FSS18 GP1A05 GP1A06


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)