GP1A17
GP1A17
s Features
1. Built-in Schmidt trigger circuit 2. Wide gap between light emitter and detector ( 10mm ) 3....
GP1A17
GP1A17
s Features
1. Built-in Schmidt trigger circuit 2. Wide gap between light emitter and detector ( 10mm ) 3. Operating supply voltage V CC : 4.5 to 17V 4. TTL and CMOS compatible output s Applications 1. Copiers 2. Analyzers, measuring instruments, etc.
Wide Gap Type, OPIC Photointerrupter
s Outline Dimensions
Internal connection diagram
( Unit : mm )
1
Voltage
regulator Amp. 1 Anode 5 ( 10k Ω ) 4 2 Cathode 3 25.4± 0.2
3 V CC 4 VO 5 GND
2
2 - C2.0
32.0± 0.3 18.6 10.0
(2.5) ( Detector center )
2 - φ 3.2± 0.2
6.0 ± 0.2 2.0 Slit width (Both sides of detector and emitter ) 5.0MIN. (1.27) (1.27) 6.0MIN.
5-
0.45 ± 0.2
0.3
(1.5)
(15.24) 2 4 3
1
5
* Unspecified tolerances shall be as follows ; Dimensions Tolerance d<= 6.0 ± 0.1 6.0< d<= 18.0 ± 0.2 18.0< d<= 25.0 ± 0.25 * ( ): Reference dimensions
*“ OPIC ” ( Optical IC ) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and signalprocessing circuit integrated onto a single chip.
s Absolute Maximum Ratings
Parameter Forward current *1 Peak forward current Input Reverse voltage Power dissipation Supply voltage Output Output current Power dissipation Operating tamperature Storage temperture *2 Soldering temperature
*1 Pules width <=100 µ s, Duty ratio = 0.01 *2 For 5 seconds
( Ta = 25˚C )
Symbol IF I FM VR P V CC IO PO T opr T stg Tsol Rating 50 1 6 75 - 0.5 to + 17 50 250 - 25 to + 85 - 40 to + 100 260 Unit mA A V mW V mA mW ˚C ˚C ˚C
“ In the absence of confirmati...