GP1A34LC
GP1A34LC
s Features
1. Snap-in mounting type 2. Can be mounted on 2 different thickness boards ( 1.0mm, 1.6mm ...
GP1A34LC
GP1A34LC
s Features
1. Snap-in mounting type 2. Can be mounted on 2 different thickness boards ( 1.0mm, 1.6mm ) . 3. Uses 3-pin connector terminal 4. High sensing accuracy ( Slit width : 0.5mm ) 5. Wide gap between light emitter and detector ( 5mm )
OPIC Photointerrupter with Connector
s Outline Dimensions
(3.9)
( Unit : mm )
Internal connection diagram Voltage
regulator Amp. (9.0) 1 2 3 6.0 3.0 0.5 ± 0.1 Slit width 1 VO 2 GND 3 V CC
8.4
4.0
21.8 16.0 0.9 6.5 4.5 5.0 4.5
10.5
s Applications
1.7
g 5.9 0.6
3 2 1.7
1 2 - 1.6 4.0
1.6
1.5
1. Copiers, printers, facsimiles
0.9 2 - 11.8
2 - 4.0 2 - 8.0
2 - 3.0 * Unspecified tolerances shall be as follows ; Dimensions(d) Tolerance d< 5.0 ± 0.15 5.0<=d< 15.0 ± 0.2 15.0<=d ± 0.3 * ( ): Reference dimensions g JAPAN AMP made connector Ultrex 172681-3 Recommended connector on the inserted side 172685-3, etc. gg
2 - 0.9 10.2
2 - 0.9
*“OPIC” ( Optical IC ) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and signalprocessing circuit integrated onto a single chip. gg Recommended connectors on the inserted side are shown on the page after next.
s Absolute Maximum Ratings
Parameter Supply voltage *1 Output voltage *2 Low level output current *3 Operating temperature *3 Storage temperature
( Ta = 25˚C )
Unit V V mA ˚C ˚C
Symbol Rating - 0.5 to + 7 VCC VO - 0.5 to + 13 I OL 10 Topr - 20 to + 75 Tstg - 30 to + 85
*1 Collector-emitter voltage of output
transistor *2 Collector cu...
