GP1A44E1
GP1A44E1
s Features
1. With compact actuator 2. Easy wiring due to built-in connector 3. Snap-in mounting type...
GP1A44E1
GP1A44E1
s Features
1. With compact actuator 2. Easy wiring due to built-in connector 3. Snap-in mounting type in order to mount to an equipment easily 4. OPIC output type for direct connection to microcomputer
Transmissive Type Photointerrupter with Actuator
s Outline Dimensions
15.3
8.0 6.2 4.0
( Unit : mm )
18.0 17.2 (5.0)
(0.5)
(9.35) 11.0
1 2 3
g
R0.5 (20 ) ˚
15.5
1.5
s Applications
1. Copiers 2. Laser beam printers 3. Facsimiles
0.8
1.0 0.6 0.2 1.5 12.8 10.8
17.0 16.8 13.8 11.4 9.9 (8.0) 6.9 5.4 2.4
Internal connection diagram Voltage
regulator 1 15k Ω 2 3 Amp
1.0
1.5
(5.0)
1 GND 2 V OUT 3 V CC
* Tolerance :± 0.3mm * ( ): Reference dimensions g DF3A-3P-2DSA made by HIROSE Japan Co. Ltd.
*“ OPIC” ( Optical IC ) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and signalprocessing circuit integrated onto a single chip.
s Absolute Maximum Ratings
Parameter Supply voltage *1 Output current *2 Operating temperature *2 Storage temperature
*1 Collector current of output
transistor *2 The connector should be plugged in/out at normal temperature.
( Ta = 25˚C )
Symbol VCC I OL Topr Tstg Rating - 0.5 to + 10 50 - 20 to + 75 - 40 to + 85 Unit V mA ˚C ˚C
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest version of the devic...