Wide Gap Type Photointerrupter
GP1L03
GP1L03
s Features
1. Wide gap between emitter and detector ( 10mm ) 2. Deep gap ( 12.2mm ) 3. High current trans...
Description
GP1L03
GP1L03
s Features
1. Wide gap between emitter and detector ( 10mm ) 2. Deep gap ( 12.2mm ) 3. High current transfer ratio ( CTR: MIN. 100% at I F = 1mA )
Wide Gap Type Photointerrupter
s Outline Dimensions ( Unit : mm )
Internal connection diagram 25.4 ± 0.2 2 - C2.0 1 2 Detector center 2- φ 3.2± 32.0 ± 0.3 (2.5)
0.2
4 3 3 Collector 4 Emitter
1 Anode 2 Cathode 6.0 ± 0.2 2.0
s Applications
1. Analyzers, measuring instruments 2. Automatic vending machines, amusement equipment 3. Optoelectronic switches, optoelectronic counters
18.6 ± 0.25 10.0
3.0
15.2
Slit width ( Both sides of detector and enitter ) 6.0MIN. (2.54)
1L03
4-
0.45 -
(15.24)
2
0.3
+ 0.3 0.1
3
1
4
*Unspecified tolerances shall be as follows ; Dimensions(d) Tolerance d<=6.0 ± 0.1 6.0< d<=16.0 ± 0.2 *( ) : Reference dimensions
s Absolute Maximum Ratings
Parameter Forward current *1 Peak forward current Reverse voltage Power dissipation Collector-emitter voltage Emitter-collector voltage Collector current Collector power dissipation Operating temperature Storage temperature *2 Soldering temperature Symbol IF I FM VR P V CEO V ECO IC PC T opr T stg T sol Rating 50 1 6 75 35 6 40 75 - 25 to + 85 - 40 to + 100 260
( Ta = 25˚C )
Unit mA A V mW V V mA mW ˚C ˚C ˚C
Input
Output
*1 Pulse width<=100 µ s, Duty ratio= 0.01 *2 For 5 seconds
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's dev...
Similar Datasheet