GP2W0106YP

GP2W0106YP IrDA Data Sheet FEATURES Built-in Photodiode Operating voltage 2.0 V to 3.6 V Conforms to eye safety IEC60825-1, without external resistor This product shall not contain the following materials, and these materials shall not be used in the production process for this product. – CFCS – Halon – Carbon Tetrachloride – 1.1.1. Trichloroethane (Methylchloroform) – Specific brominated flame retardants such as the PBBOS and PBBS are not used in this device. External force applied to the device after mounting can cause mounting defects such as the terminal coming off. Be careful when handling the device and prevent objects from touching the device after mounting. Refer to the ‘Precautions for Soldering’ section. When the system (program) is designed, the turn around time from transmit to receive should be designed by considering 200 µs or more that is specified by IrDA. This turn around time means the time that this device does not temporarily detect the incoming signal, since the transmitted light from the transmitter side reaches the detector side of the same transceiver. Consider that 200 µs or more (at TA = 25°C, no input signal) is necessary to return from shut-down mode to ready-operation mode. In addition, thoroughly confirm the operation in the actual application. When there is considerable external stray light or a light source is located near the transceiver, or the detector face receives considerable external stray light, a pulse other than desi...