DatasheetsPDF.com

GI856 Dataheets PDF



Part Number GI856
Manufacturers General Semiconductor
Logo General Semiconductor
Description FAST SWITCHING PLASTIC RECTIFIER
Datasheet GI856 DatasheetGI856 Datasheet (PDF)

GI850 THRU GI858 FAST SWITCHING PLASTIC RECTIFIER Reverse Voltage - 50 to 800 Volts DO-201AD Forward Current - 3.0 Amperes FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High surge current capability ♦ Fast switching for high efficiency ♦ Construction utilizes void-free molded plastic technique ♦ High forward current operation ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs (2.3kg) tension 1.0 (25.4) MIN. .

  GI856   GI856



Document
GI850 THRU GI858 FAST SWITCHING PLASTIC RECTIFIER Reverse Voltage - 50 to 800 Volts DO-201AD Forward Current - 3.0 Amperes FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High surge current capability ♦ Fast switching for high efficiency ♦ Construction utilizes void-free molded plastic technique ♦ High forward current operation ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs (2.3kg) tension 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) MECHANICAL DATA 0.052 (1.32) 0.048 (1.22) DIA. 1.0 (25.4) MIN. Dimensions in inches and (millimeters) Case: JEDEC DO-201AD molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.04 ounce, 1.1 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS GI850 GI851 GI852 GI854 GI856 GI858 UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum non-repetitive peak reverse voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at T A=90°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at: 3.0A 9.4A, TJ=175°C Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance (NOTE 1) Maximum reverse recovery time (NOTE 2) Maximum reverse recovery current (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range TA=25°C TA=100°C VRRM VRMS VDC VRSM I(AV) 50 35 50 75 100 70 100 150 200 140 200 250 3.0 400 280 400 450 600 420 600 650 800 510 800 880 Volts Volts Volts Volts Amps IFSM 100.0 Amps VF 1.25 1.10 150 150 10.0 200 28.0 200.0 2.0 22.0 8.0 -50 to +150 250 300 500 Volts µA pF ns Amps °C/W °C IR CJ trr IRM(REC) RΘJA RΘJL TJ, TSTG NOTES: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Reverse recovery test conditions: IF=1.0A, VR=30V, di/dt=50A/µs, and Irr=10% IRM for measurement of trr (3) Thermal resistance from junction to ambient and from junction to lead at 0.375” (9.5mm) lead length, with both leads equally heat sink 4/98 RATINGS AND CHARACTERISTIC CURVES GI850 THRU GI858 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, AMPERES FIG. 2 - MAXIMUM PEAK FORWARD SURGE CURRENT 8.0 200 NON-REPETITIVE TJ=25°C TL=LEAD TEMPERATURE L=0.25” (6.3 mm) L= LEAD LENGTH 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 6.0 L=0.375” (9.5mm) LEAD LENGTH 0.8 x 0.8 x 0.40” (20 x 20 x 1mm) COPPER HEATSINKS 100 TJ=150°C 4.0 TJ=25°C 2.0 TA=AMBIENT TEMPERATURE 0.375” (9.5mm) LEAD LENGTH RESISTIVE OR INDUCTIVE LOAD TJ=150°C REPETITIVE 0 30 10 1 10 NUMBER OF CYCLES AT 60 HZ 50 70 90 110 130 150 170 100 TEMPERATURE, °C F.


GI854 GI856 GI858


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)