NB3L02

NB3L02 2.8 V, High Precision 1:2 Clock Fanout Buffer Description The NB3L02 is a low−skew, low jitter 1:2 clock fanout buffer, ideal for use in portable end−equipment, such as mobile phones or tablet applications. The MCLK_IN pin has an integrated AC coupling capacitor and will directly accept a square or sine wave clock input, such as a temperature compensated crystal oscillator (TCXO). The minimum acceptable input amplitude of the sine wave is 800 mV peak−to−peak. The NB3L02 is offered in a 0.4 mm pitch 6−ball, wafer−level chip−scale package (WLCSP) (0.77 mm x 1.17 mm). Features 800 mV Single Ended Outputs Low Phase Noise: −144 dbc/Hz @ 10 kHz Offset Ultra Small Package: 0.4 mm Pitch WLCSP6 (0.77 mm x 1.17 mm) Exceeds JEDEC ESD Standards: 4000 V HBM, 200 V MM Industrial Temperature Range: −40°C to +85°C These are Pb−Free Devices PIN DESCRIPTIONS Ball No. Name I/O Description A1 VDD I A2 CLK_OUT1 O Power Supply Voltage Clock Output 1 B1 MCLK_IN I Master Clock Input B2 GND − Ground C1 GND − Ground C2 CLK_OUT2 O Clock Output 2 http://onsemi.com WLCSP6 FC SUFFIX CASE 567HJ MARKING DIAGRAM L2MG L2 = Specific Device Code M = Date Code G = Pb−Free Package PINOUT DIAGRAM © Semiconductor Components Industries, LLC, 2013 June, 2013 − Rev. 0 Figure 1. Simplified Block Diagram ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 3 of this data sheet. 1 Publication Order Number: NB3L02/D NB3L...