DC Power Relay
CPC1777
i4-PAC™ DC Power Relay
Parameter Blocking Voltage Load Current, TA=25ºC With 5°C/W Heat Sink No Heat Sink On-re...
Description
CPC1777
i4-PAC™ DC Power Relay
Parameter Blocking Voltage Load Current, TA=25ºC With 5°C/W Heat Sink No Heat Sink On-resistance RθJC
Rating 600
4.6 1.5 0.5 0.35
Units VP
ADC Ω ºC/W
Features
100% Solid State Compact i4-PAC Power Package Low Thermal Resistance (0.35°C/W) 4.6ADC Load Current with 5°C/W Heat Sink Electrically Non-conductive Thermal Pad for Heat
Sink Applications Low Drive Power Requirements Arc-Free With No Snubbing Circuits 2500Vrms Input/Output Isolation No EMI/RFI Generation Machine Insertable, Wave Solderable
Applications
Industrial Controls Motor Control Robotics Medical Equipment—Patient/Equipment Isolation Instrumentation
Multiplexers Data Acquisition Electronic Switching I/O Subsystems Utility Meters (gas, oil, electric and water) Transportation Equipment Aerospace/Defense
Pin Configuration
Description
Clare and IXYS have combined to bring OptoMOS® technology, reliability and compact size to a new family of High Power Solid State Relays. As part of this new family, the CPC1777 single pole normally open (1-Form-A) DC Solid State Relay employs optically coupled MOSFET technology to provide 2500Vrms of input to output isolation.
The output is constructed with an efficient MOSFET switch and photovoltaic die that uses Clare’s patented OptoMOS architecture while the input GaAlAs infrared LED provides the optically coupled control. The combination of low on-resistance and high load current handling capability mak...
Similar Datasheet