Multistandard Sound IF
Multistandard Sound IF with Vision Carrier Input
Preliminary Data
Features q High input sensitivity q Low distortion for...
Description
Multistandard Sound IF with Vision Carrier Input
Preliminary Data
Features q High input sensitivity q Low distortion for AM-sound application q AM detector is alignmentfree q Few external components q Selectable IF inputs low crosstalk q Intercarrier output for quasi parallel sound application q All pins are ESD protected
TDA 6048-5X
Bipolar IC
P-DSO-14-1
Type TDA 6048-5X
Ordering Code Q67000-A5061
Package P-DSO-14-1 (SMD)
Functional Description
Multistandard sound IF with two selectable IF inputs. The selection between the two IF inputs is made by applying ground to a special IF-select pin, or by leaving it in a high impedance state.
Both IF inputs are symmetrical inputs. There are two possible ways of processing the select sound IF:
An audio frequency signal is available after amplifying and demodulating a selected AM sound IF signal (e.g. L standard).
For applications with quasi parallel sound a selected FM-sound IF is mixed with a picture carrier which is applied symmetrically to a picture carrier input stage (e.g. B/G standard).
The difference of both, picture carrier and FM-sound IF, is available for further processing.
A three-level switch defines the activating of the AM- and/or FM-signal path. So, three modes of operating are possible:
AM sound ON
difference frequency OFF
OFF
ON
ON ON
Application For use in multistandard VCR- and TV sets.
Pin Functions
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Function IF input 1 IF input 1 AGC-time constant AM-sou...
Similar Datasheet