Chip Thermistors
BetaTHERM Sensors
BetaCurve Interchangeable Thermistor Series II
BetaCurve Interchangeable Thermistor Series II
.
The...
Description
BetaTHERM Sensors
BetaCurve Interchangeable Thermistor Series II
BetaCurve Interchangeable Thermistor Series II
.
Thermistor Configuration
30 AWG Sliver Plated Copper Lead Wires With Etched TFE Telfon Insulation,
Thermally Conductive Epoxy Coating
12.7mm +/-3.3mm (0.50Ó +/-0.13Ó)
76.2mm +/-3.3mm (3.00Ó +/-3.13Ó)
2.413mm (0.095Ó) Max. Dia.
Example: BetaCURVE Series II Part Number
10K 3 A 1 I A
Tolerance Classification
Insulated Lead Wires
BetaCURVE Series
Epoxy Coated
Material Curve # Resistance Value
@
25oC
Applications ¥ Temperature sensing, control and compensation. ¥ P.C. board mounting for over temperature
protection. ¥ Automotive car seat heater control and engine
management. ¥ Assembly into probes for a wide variety of
applications in industrial temperature control and instrumentation.
Features
¥ Rapid Time Response (1 second typical in liquids). ¥ DC (Dissipation Constant) = 0.85mW/ oC
typical in still air at 25oC. ¥ Min./Max. Temperature Exposure = -80 to 150oC.
¥ Available in custom probe assemblies.
¥ Proven Stability and Reliability.
¥ Teflon Insulated lead wires.
¥ Choice of 4 temperature tolerance classifications:
Tolerance Code: A B C D
Specification: +/-0.1oC, 0oC to 70oC +/-0.2oC, 0oC to 70oC +/-0.5oC, 0oC to 70oC +/-1.0oC, 0oC to 70oC
Similar to the BetaCURVE Thermistor Series I, the Series II thermistors are small epoxy coated devices. The same quality thermistor elements are used during assembly. Series II are manufactured using 30...
Similar Datasheet