2K7MCD1

BetaTHERM Sensors Photo Thermistor Configuration 3.18mm Nominal (0.125") Custom Lengths 3.18mm (0.125") 0.457mm Dia. Typ. (0.018") 38 AWG Solid Nickel Epoxy Filled Polyimide with Isomid Insulation Tube (0.001" wall thickness) Sample Part Number: 10K 3 MCD 1 Tolerance Code @ 25oC micro-Chip Probe Material Curve # Resistance Value @ 25oC Micro-BetaCHIP Thermistor Probe Micro-BetaCHIP Probe: Applications ¥ Low volume flow sensors (liquids or gases). ¥ Laboratory animal research. ¥ Peltiere (thermal cooler) temperature tracking sensors. ¥ Temperature control for bath showers. ¥ DNA research sensors. ¥ Medical catheters. Features: ¥ Rapid Time Constant (200 milliseconds in liquids). ¥ Custom tolerances available. ¥ 0.3 mW/oC typ. Dissipation Constant in air at 25oC. ¥ Smaller than our mini-BetaCURVE device. The micro-BetaCHIP probe is BetaTHERMÕs smallest packaged thermistor device. The probe is produced for applications that require rapid temperature response and applications where space is very limited. The probes are extremely small (0.457mm dia.) and fragile. The sensor is potted in a polyimide tube with epoxy. Adequate moisture protection should be provided when using the device in high humidity applications. The size of the micro-BetaCHIP thermistors allows it to be installed in 20 AWG (0.914mm dia.) thin wall hypodermic tubing. Custom probe assemblies protect the thermistor element from high humidity and mechanical shock. The small mass of the unit allows th...