150mA LDO REGULATOR
RP104 SERIES
Preliminary
OUTLINE
The RP104 Series are CMOS-based voltage regulator ICs with high...
150mA LDO
REGULATOR
RP104 SERIES
Preliminary
OUTLINE
The RP104 Series are CMOS-based voltage
regulator ICs with high output voltage accuracy, extremely low supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an error amplifier, resistor-net for voltage setting, a current limit circuit, and a chip enable circuit.
These ICs perform with low dropout voltage and a chip enable function. The line transient response and load transient response of the RP104 Series are excellent, thus these ICs are very suitable for the power supply for hand-held communication equipment.
The output voltage of these ICs is fixed with high accuracy. Since the packages for these ICs are PLP1010-4 , SOT-23-5 and SC-82AB,therefore high density mounting of the ICs on boards is possible.
FEATURES
Low Supply Current.............................................................. Typ. 1µA
(Except the current through CE pull down circuit)
Standby Mode ......................................................................Typ. 0.1µA
Low Dropout Voltage ............................................................Typ. 0.28V (IOUT=150mA 2.5V Output type)
Low Temperature-Drift Coefficient of Output Voltage
Typ. ±40ppm/°C
Good Line Regulation...........................................................Typ. 0.05%/V
High Output Voltage Accuracy..............................................±1.0%
Small Packages ..........................