Pt100

Cable Sensor, Pt100/Pt1000 Sensors with 4-wire silicone cable for pockets or tubes 4-wire air sensors Elements in 1/1 DIN B, 1/3 DIN B and 1/6 DIN B The sensors can be used with the CombiTemp, Building Block Temperature Measuring System Description A platinum resistor is built into the temperature sensor. Changes in temperature are reflected by changes in the electrical resistance, so that measuring the value of the resistance gives an analogue expression for the actual temperature. The Pt100 element has a resistance of 100 Ohms at 0°C and a welldocumented working curve (DIN/EN/IEC 60751) within the nominal working range. The sensors are used in a wide range of applications within the marine, industrial, energy and food sectors. The Pt100 sensor fits as an insert in sensor tubes with an internal diameter of 6 mm such as the CombiTemp temperature measuring system. Air sensors are used without sensor pockets to ensure fast response time. www.baumerprocess.com Design and specifications subject to change without notice Data Sheet 2902-1 Page 1 Technical Data Standard sensor Measuring range Ambient temperature Marking label Pressure range Humidity Protection class Cable type Wires Length Air sensor Measuring range Ambient temperature Marking label Environment Air gap Humidity Protection class Cable type Wires Length -50...205°C -50...205°C -30...105°C < 25 bar (water flow 3m/sec.) < 98% RH, condensing IP 65 High-flexible silicone, grey 4 (2 x Red, 2 x white) up to 99.99 metres -5...