MTA9ASF51272PZ

4GB (x72, ECC, SR) 288-Pin DDR4 RDIMM Features DDR4 SDRAM RDIMM MTA9ASF51272PZ – 4GB Features DDR4 functionality and operations supported as defined in the component data sheet 288-pin, registered dual in-line memory module (RDIMM) Fast data transfer rates: PC4-2400, PC4-2133, or PC4-1866 4GB (512 Meg x 72) VDD = 1.20V (typical) VPP = 2.5V (typical) VDDSPD = 2.2–3.6V Supports ECC error detection and correction Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals Low-power auto self refresh (LPASR) Data bus inversion (DBI) for data bus On-die VREFDQ generation and calibration Single-rank On-board I2C temperature sensor with integrated serial presence-detect (SPD) EEPROM 16 internal banks; 4 groups of 4 banks each Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) Selectable BC4 or BL8 on-the-fly (OTF) Gold edge contacts Halogen-free Fly-by topology Terminated control, command, and address bus Figure 1: 288-Pin RDIMM (MO-309, R/C-D) Module height: 31.25mm (1.23in) Options Operating temperature – Commercial (0°C ≤ TOPER ≤ +95°C) Package – 288-pin DIMM (halogen-free) Frequency/CAS latency – 0.83ns @ CL = 16 (DDR4-2400) – 0.93ns @ CL = 15 (DDR4-2133) – 1.07ns @ CL = 13 (DDR4-1866) Marking None Z -2G4 -2G1 -1G9 Table 1: Key Timing Parameters Speed Grade -2G4 -2G1 -1G9 Industry Data Rate (MT/s) Nomenclature CL = 18 CL = 16 CL = 15 CL = 14 CL = 13 CL = 12 CL = 11 CL ...