Document
Global LCD Panel Exchange Center
www.panelook.com
Chunghwa Picture Tubes, Ltd.
Technical Specification
To : HUI YING TUNG ELECTRONIC CO., LTD Date : 2008/08/14
CPT TFT-LCD
CLAA 220FA01
ACCEPTED BY:
APPROVED BY
JOE CHOU
CHECKED BY
Tristan Wang
PREPARED BY
Product Planning Management
General Division
Prepared by: Design General Division CHUNGHWA PICTUER TUBES, LTD.
No. 1, Huaying Rd., Sanho Tsun, Lungtan Shiang, Taoyuan, Taiwan, 325, R.O.C. TEL: +886-3-4805678 FAX: +886-3-4800589
Doc. No: SPEC-CLAA220FA01-HUI YING -Ver1 Issue Date: 2008/08/14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Title:CLAA220FA01
CHUNGHWA PICTUER TUBES, LTD. TECHNICAL SPECIFICATION
Technical Specification
Doc. No: Version: Issue Date :
B 2008/08/14
Modification Record List
NO. Issue Date
Modification Index
A 2008/02/19 Tentative version for the customer
B
2008/04/23
Confirm the specification of Backlight, including VL, VS and lifetime………………………………………………….(P.5 & P.19)
Modifier
ISO Datasheet No: T-3010004-008-F Datasheet Version.: 01
CHUNGHWA PICTUER TUBES, LTD.
Page: 2/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Title:CLAA220FA01
CHUNGHWA PICTUER TUBES, LTD. TECHNICAL SPECIFICATION
Technical Specification
Doc. No: Version: Issue Date :
B 2008/08/14
Table Of Content
NO Table of Content
1 OVERVIEW 2 ABSOLUTE MAXIMUM RATINGS 3 ELECTRICAL CHARACTERISTICS 4 INTERFACE PIN CONNECTION 5 INTERFACE TIMING 6 BLOCK DIAGRAM 7 MECHANICAL SPECIFICATION 8 OPTICAL CHARACTERISTICS 9 RELIABILITY TEST CONDITIONS 10 DESIGNATION OF LOT MARK 11 PACKING SPECIFICATION 12 HANDLING PRECAUTIONS FOR TFT-LCD MODULE
Note
P.4 P.5 P.6 P.11 P.13 P.16 P.17 P.19 P.23 P.24 P.26 P.28
ISO Datasheet No: T-3010004-008-F Datasheet Version.: 01
CHUNGHWA PICTUER TUBES, LTD.
Page: 3/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Title:CLAA220FA01
CHUNGHWA PICTUER TUBES, LTD. TECHNICAL SPECIFICATION
Technical Specification
Doc. No: Version: Issue Date :
B 2008/08/14
1. OVERVIEW
CLAA220FA01 is 21.6” color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module composed of LCD panel, driver ICs, control circuit and backlight. By applying 6 bit digital data, 1920×1200, 16.7Mcolor images are displayed on the 21.6” diagonal screen. Input power voltage is 5.0V for LCD driving. Inverter for backlight is not included in this module. General specification is summarized in the following table:
ITEM Display Area(mm) Number of Pixels Pixel Pitch(mm) Color Pixel Arrangement Display Mode Number of Colors Brightness(cd/m^2) Viewing Angle(H/V) Surface Treatment Power consumption(W) Module Size(mm) Module Weight(g) Backlight Unit
SPECIFICATION 465.12 (H) × 290.7 (V) (22.0-inch diagonal)
1920 (H) × 1200(V) 0.24225(H) × 0.24225(V)
RGB vertical stripe Normally white, TN 16.7M(6bits+Hi-FRC) 300cd/m2 (Typ.)(center, 7.5mA)
170/160 (Typ.) Anti-glare, 3H 32.0(Typ.) (w/o Inverter) 493.7 (W) × 320.1 (H) ×16.5 (D) (Typ.)
2350(Typ.) CCFL, 4 tubes(top × 2/bottom × 2) , Edge light
ISO Datasheet No: T-3010004-008-F Datasheet Version.: 01
CHUNGHWA PICTUER TUBES, LTD.
Page: 4/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Title:CLAA220FA01
CHUNGHWA PICTUER TUBES, LTD. TECHNICAL SPECIFICATION
Technical Specification
Doc. No: Version: Issue Date :
B 2008/08/14
2. ABSOLUTE MAXIMUM RATINGS
ITEM
SYMBOL
Power Supply Voltage for LCD VCC
Lamp Voltage
VL
MIN. 0
760
MAX. 6
950
UNIT V
Vrms
REMARK
Lamp Current
ILO 3.0 8.0 mArms
Lamp Frequency static electricity
Operation Temperature Storage Temperature
FL VESDt VESDc
Top
Tstg
40 -200 -8000
0
-20
80 200 8000
50
60
kHz
V V
*5)
℃ *1). 2). 3). 6)
℃ *1). 2). 3)
Delayed Discharge Time
TD
--
1
sec *8)
[Note]
1).The relative temperature and humidity range are as below sketch, 90%RHMax.(Ta≦40℃).
2).The maximum wet bulb temperature ≦39℃(Ta>40℃) and without dewing.
3).If you use the product in an environment which over the definition of temperature and humidity too long to effect the result of eye-etching.
4).The life time of the lamp is related to the current of the lamp, so please according to the description of the “(b) backlight” on page 7.
5).Test Condition: IEC 1000-4-2 VESDt: Contact discharge to input connector; VESDC: Contact discharge to module
6).If you operate the product in normal temperature range, the center surface of panel should be under 60℃.
7).When lamp current is out of the absolute maximum range, the life will fall rapidly or shown unusual sign. IL min 2mA only for test only, but we can’t guarantee the lifetime .