DatasheetsPDF.com

WP7113SYD Dataheets PDF



Part Number WP7113SYD
Manufacturers Kingbright Corporation
Logo Kingbright Corporation
Description SOLID STATE LAMP
Datasheet WP7113SYD DatasheetWP7113SYD Datasheet (PDF)

WP7113SYD T-1 3/4 (5mm) Solid State Lamp DESCRIPTIONS z The Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip z Electrostatic discharge and power surge could damage the LEDs z It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs z All devices, equipments and machineries must be electrically grounded FEATURES z Low power consumption z Popular T-1 3/4 diameter package z General purpose leads z Reliable and rugged z Lon.

  WP7113SYD   WP7113SYD



Document
WP7113SYD T-1 3/4 (5mm) Solid State Lamp DESCRIPTIONS z The Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip z Electrostatic discharge and power surge could damage the LEDs z It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs z All devices, equipments and machineries must be electrically grounded FEATURES z Low power consumption z Popular T-1 3/4 diameter package z General purpose leads z Reliable and rugged z Long life - solid state reliability z Available on tape and reel z RoHS compliant APPLICATIONS z Status indicator z Illuminator z Signage applications z Decorative and entertainment lighting z Commercial and residential architectural lighting ATTENTION Observe precautions for handling electrostatic discharge sensitive devices PACKAGE DIMENSIONS Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SELECTION GUIDE Part Number Emitting Color (Material) Lens Type WP7113SYD ■ Super Bright Yellow (AlGaInP) Yellow Diffused Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. © 2019 Kingbright. All Rights Reserved. Spec No: DSAF2443 / 1101005345 Rev No: V.10B Date: 04/03/2019 Iv (mcd) @ 20mA [2] Min. Typ. 650 1200 Viewing Angle [1] 2θ1/2 30° Page 1 / 5 ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C Parameter Symbol Emitting Color Wavelength at Peak Emission IF = 20mA Dominant Wavelength IF = 20mA Spectral Bandwidth at 50% Φ REL MAX IF = 20mA Capacitance λpeak λdom [1] Δλ C Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Forward Voltage IF = 20mA VF [2] Super Bright Yellow Reverse Current (VR = 5V) IR Super Bright Yellow Temperature Coefficient of λpeak IF = 20mA, -10°C ≤ T ≤ 85°C TCλpeak Super Bright Yellow Temperature Coefficient of λdom IF = 20mA, -10°C ≤ T ≤ 85°C TCλdom Super Bright Yellow Temperature Coefficient of VF IF = 20mA, -10°C ≤ T ≤ 85°C TCV Super Bright Yellow Notes: 1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. WP7113SYD Value Typ. Max. 590 - 590 - 28 - 25 - 2 2.5 - 10 0.12 - 0.07 - -2 - Unit nm nm nm pF V μA nm/°C nm/°C mV/°C ABSOLUTE MAXIMUM RATINGS at TA=25°C Parameter Symbol Value Power Dissipation Reverse Voltage Junction Temperature Oper.


MB95F334K WP7113SYD 980LB7C


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)