DatasheetsPDF.com

PBA10F Dataheets PDF



Part Number PBA10F
Manufacturers COSEL
Logo COSEL
Description AC-DC Power Supplies Enclosed type
Datasheet PBA10F DatasheetPBA10F Datasheet (PDF)

AC-DC Power Supplies Enclosed type Ordering information PBA10FPPBBAA//PPBW PB A 10 F -O -O 123456 R Recommended EMI/EMC Filter NAC-06-472 1Series name 2Single output 3Output wattage 4Universal input 5Output voltage 6Optional *5 C :with Coating G :Low leakage current High voltage pulse noise type : NAP series Low leakage current type : NAM series *The EMI/EMC Filter is recommended *to connect with several devices. E :Low leakage current and EMI class A T :Vertical terminal block J :.

  PBA10F   PBA10F



Document
AC-DC Power Supplies Enclosed type Ordering information PBA10FPPBBAA//PPBW PB A 10 F -O -O 123456 R Recommended EMI/EMC Filter NAC-06-472 1Series name 2Single output 3Output wattage 4Universal input 5Output voltage 6Optional *5 C :with Coating G :Low leakage current High voltage pulse noise type : NAP series Low leakage current type : NAM series *The EMI/EMC Filter is recommended *to connect with several devices. E :Low leakage current and EMI class A T :Vertical terminal block J :Connector type N :with Cover (UL508 is acquired) N1 :with DIN rail and Cover V :Output voltage setting potentiometer external- ly Cover is optional MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT PBA10F-5 10 5V 2A PBA10F-12 10.8 12V 0.9A PBA10F-24 12 24V 0.5A SPECIFICATIONS MODEL PBA10F-5 PBA10F-12 PBA10F-24 VOLTAGE[V] AC85 - 264 1f or DC110 - 370 (AC50 or DC70 Please refer to the instruction manual 2.1 Input voltage *3) CURRENT[A] ACIN 100V 0.30typ (Io=100%) ACIN 200V 0.20typ (Io=100%) FREQUENCY[Hz] 50/60 (47 - 440) or DC INPUT EFFICIENCY[%] ACIN 100V 74typ ACIN 200V 74typ 76typ 76typ 77typ 77typ INRUSH CURRENT[A] ACIN 100V ACIN 200V 15typ (Io=100%) 30typ (Io=100%) LEAKAGE CURRENT[mA] 0.15/0.30max (ACIN 100V/240V 60Hz, Io=100%, According to IEC60950-1,DENAN) VOLTAGE[V] 5 12 24 CURRENT[A] 2 0.9 0.5 LINE REGULATION[mV] *6 20max 48max 96max LOAD REGULATION[mV] *6 40max 100max 150max RIPPLE[mVp-p] 0 to +50C*1 80max -10 - 0C*1 140max 120max 160max 120max 160max OUTPUT RIPPLE NOISE[mVp-p] 0 to +50C*1 -10 - 0C*1 120max 160max 150max 180max 150max 180max TEMPERATURE REGULATION[mV] 0 to +50C -10 to +50C 50max 60max 120max 150max 240max 290max DRIFT[mV] *2 20max 48max 96max START-UP TIME[ms] 200typ(ACIN 100V, Io=100%) *Start-up time is 700ms typ for less than 1minute of applying input again from turning off the input voltage. HOLD-UP TIME[ms] 20typ (ACIN 100V, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 4.50 - 5.50 10.0 - 13.2 19.2 - 27.0 OUTPUT VOLTAGE SETTING[V] 5.00 - 5.15 12.00 - 12.48 24.00 - 24.96 OVERCURRENT PROTECTION Works over 105% of rated current and recovers automatically PROTECTION CIRCUIT AND OTHERS OVERVOLTAGE PROTECTION[V] OPERATING INDICATION 5.75 - 7.00 LED (Green) 15.0 - 18.0 REMOTE ON/OFF None 30.0 - 37.0 INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature) ISOLATION INPUT-FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature) OUTPUT-FG AC500V 1minute, Cutoff current = 25mA, DC500V 50MWmin (At Room Temperature) OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +71C (Required Derating), 20 - 90%RH (Non condensing) 3,000m (10,000feet) max ENVIRONMENT STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION -20 to +75C, 20 - 90%RH (Non condensing) 9,000m (30,000feet) max 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each X, Y and Z axis SAFETY AND AGENCY APPROVALS (At only AC input) UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN NOISE CONDUCTED NOISE Complies with FCC Part15 classB, VCCI-B, CISPR22-B, EN55011-B, EN55022-B REGULATIONS HARMONIC ATTENUATOR Complies with IEC61000-3-2 (Not built-in to active filter *4) *7 OTHERS CASE SIZE/WEIGHT COOLING METHOD 31X78X68mm [1.22X3.07X2.68 inches] (without terminal block) (WXHXD) / 150g max (with cover : 180g max) Convection *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN :RM101). *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. *3 Derating is required. *4 When two or more units are used,they may not comply with the harmonic attenuator. Please contact us for details. *5 Please contact us about safety approvals for the model with option. *6 Please contact us about dynamic load and input response. *7 Please contact us about class C. * Parallel operation with other model is not possible. * Derating is required when operated with cover. * A sound may occur from power supply at peak loading. PBA/PBWW--22 Block diagram PBA10F AC IN 85 - 264V FUSE AC250V 2.5A NOISE FILTER INRUSH CURRENT LIMIT RECTIFIER AND FILTER FG CONTROL INVERTER TRANSFORMER RECTIFIER AND FILTER CURRENT SENSING Photocoupler CONTROL Photocoupler OVER VOLTAGE PROTECTION PBA/PBW DC OUT External view ¶ External size of option T,J,N,N1 and V is different from standard model and refer to 7 Option of instruction manual for details. Voltage adjust 18 [0.71] 12.2 ±1.5 [0.48] 2.5 LED [0.1] Cover name plate 16.5±2 [0.65] 68 [2.68] 70.5 [2.78] 11.5 9.5 7.5 [0.45] [0.37] [0.3] +V -V FG AC(L) AC(N) 15.1±1.5 [0.59] 22.6±1.5 [0.89] M3 Cover (option) Terminal cover 2-M3 Mounting hole 78 [3.07] 34.5 [1.36] 49.5±0.5 [1.95] 4 [0.16] Point A:C102 Name plate 2-M3 Mounting hole 18 [0.71] 31 [1.22] 34.5 [1.36] ¶ Tolerance : ±1 [±0.04] ¶ Weight : 150g max (with cover : 180g max) ¶ PCB Materia.


R5F562G7AGFP PBA10F PBA10F-5


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)