AS3492

valid Datasheet AS3492 Highly Efficient 2-10 LEDs Backlight Driver with 2 PWM Inputs 1 General Description The AS3492 is an inductive highly efficient DCDC boost converter. The DCDC converter operates at a fixed frequency of 2MHz and includes soft startup to allow easy integration into noise sensitive RF systems. A predictable startup is guaranteed even with very low duty cycle PWM input signals. The voltage on the output capacitor is controlled to minimize ripple and to avoid any acoustic effects for low frequency PWM input signals. The output of the DCDC converter is used for five current sources connected to up to 10 LEDs. If a current source is not required, it shall be connected to VOUT or GND - the AS3492 detects this condition and disables this current source automatically; this keeps the efficiency of the system constantly high. The AS3492 is controlled by two enable inputs, ON13 and ON45. These inputs can also be used to connect a PWM input (like DLS or DBC). The AS3492 includes several protection functions like undervoltage lockout, overcurrent and overtemperature. No microvias are required to assemble the AS3492 if only four channels are used and ON13=ON45. The AS3492 is available in a space-saving WL-CSP package measuring only 1.7x1.4x0.5mm and operates over the -30ºC to +85ºC temperature range. Figure 1. AS3492 Typical Operating Circuit 2 Key Features 2 MHz DCDC Boost converter - Small 4.7µH external coil - Very high system efficiency of 86% (DCDC and curre...